| Session Title |
Presentation Order |
Date |
First Name |
Last Name |
Country |
Affiliation |
Presentation Title |
| Multi-functional Composites |
P3-01 |
Aug. 24th |
Seong-Dae |
Park |
Korea |
Korea Electronics Technology Institute |
CHARACTERISTICS OF CYANATE ESTER AND FLUORENYL EPOXY-BASED POLYMER-CERAMIC COMPOSITES |
| Multi-functional Composites |
P3-02 |
Aug. 24th |
Hansang |
Kwon |
Korea |
RIPS |
CARBON NANOTUBE GRADIENT LAYERS REINFORCED ALUMINUM MATRIX COMPOSITE MATERIALS |
| Multi-functional Composites |
P3-03 |
Aug. 24th |
Seon Jeong |
Kim |
Korea |
Hanyang Universtiy |
ELECTRICALLY CONDUCTING COMPOSITE HOLLOW FIBERS |
| Multi-functional Composites |
P3-04 |
Aug. 24th |
CHEOL |
KIM |
Korea |
Kyungpook National University |
BENDING BEHAVIOR OF A THIN SINGLE-LAYER CARBON-NANOFIBER/POLYPYRROLE COMPOSITE FILM |
| Multi-functional Composites |
P3-05 |
Aug. 24th |
wang |
qin |
China |
nuaa |
PREPARATION AND PROPERTIES OF NANO--ATP/ TiO2/ PP COMPOSITES |
| Multi-functional Composites |
P3-06 |
Aug. 24th |
Jian-Gang |
Guo |
China |
Tianjin University |
A multi-scale Experimental analysis for mechanical properties of carbon nanotube fibers by Raman spectroscopy |
| Multi-functional Composites |
P3-07 |
Aug. 24th |
Sung-Ryong |
Kim |
Korea |
Chungju National Univ. |
Fiber Direction Effect on Thermal Conductivity of PEEK Composites |
| Multi-functional Composites |
P3-08 |
Aug. 24th |
Phung |
Thinh |
Korea |
Inje UNiversity |
FABRICATION OF ORDERED POROUS POLYMER FILM IN POLY- (N-VINYLCARBAZOLE)/MULTIWALLED CARBON NANOTUBE COMPOSITE |
| Multi-functional Composites |
P3-09 |
Aug. 24th |
Bong Seong |
Kim |
Korea |
Inje university |
ENHANCED PHOTOCONDUCTING PROPERTY OF POLY(N- VINYLCARBAZOLE)/GOLD NANO-COMPOSITE LANGMUIR-SCHAEFER FILMS |
| Multi-functional Composites |
P3-10 |
Aug. 24th |
dae gun |
kim |
Korea |
Inje university |
MICROWAVE ABSORPTION OF POLYPYRROLE SYNTHESIZED USING DIFFERENT OXIDANTS |
| Multi-functional Composites |
P3-11 |
Aug. 24th |
won jung |
kim |
Korea |
Inje University |
FABRICATION OF ORDERED POROUS POLYMER FILM IN CELLULOSE TRIACETATE-MULTIWALLED CARBON NANOTUBE COMPOSITES |
| Multi-functional Composites |
P3-12 |
Aug. 24th |
Jeong Hyeon |
Hwang |
Korea |
Kumoh National Institute of Technology |
PREPARATION AND CHARACTERIZATION OF ATBN-FUNCTIONALIZED GRAPHENE NANOPLATELETS AND THE EPOXY NANOCOMPOSITES |
| Multi-functional Composites |
P3-13 |
Aug. 24th |
Jinwoo |
Kwak |
Korea |
Hyundai Motor Company |
PROPERTIES OF POLYMER-CARBON NANOTUBE COMPOSITES FABRICATED BY HIGH-SHEAR PROCESS |
| Multi-functional Composites |
P3-14 |
Aug. 24th |
Dong-Seok |
Seo |
Korea |
Korea Electronics Technology Institute |
CHARACTERISTICS OF INSULATING RESIN/INORGANIC COMPOSITES |
| Multi-functional Composites |
P3-15 |
Aug. 24th |
Daeyeon |
Kim |
Korea |
Kumoh National Institute of Technology |
FUNCTIONALIZATION OF GRAPHENE NANOPLATELETS WITH AN ELASTOMER CTBN AND THE EFFECT ON THE VINYL ESTER NANOCOMPOSITES |
| Nanocomposites |
P3-16 |
Aug. 24th |
Hyun-Kuk |
Park |
Korea |
Korea Institute of Industial Technology |
FABRICATION
AND MECHANICAL PROPERTIES OF WC-6WT.%CO HARD MATERIALS PREPARED BY
SPARK PLASMA SINTERING PROCESS FOR FSW TOOL APPLICATION |
| Nanocomposites |
P3-17 |
Aug. 24th |
Myung-Chul |
Shin |
Korea |
Seoul National University of Science and Technology |
RHEOLOGICAL INVESTIGATIONS OF PC/MWNT COMPOSITES |
| Nanocomposites |
P3-18 |
Aug. 24th |
a-young |
Kim |
Korea |
Korea University |
EFFECTS OF ZnO THIN FILM SURFACE STRUCTURE ON NANOWIRES GROWN BY MOCVD |
| Nanocomposites |
P3-19 |
Aug. 24th |
Seung-Beom |
Kim |
Korea |
Korea University of technology and education |
PROPERTIES OF POLYPROPYLENE/CARBON FIBER/MULTI-WALLED CARBON NANOTUBE NANOCOMPOSITES |
| Nanocomposites |
P3-20 |
Aug. 24th |
Youngjae |
Yoo |
Korea |
Korea Research Institute of Chemical Technology |
Thermally conductive carbon filled polymer composites |
| Nanocomposites |
P3-21 |
Aug. 24th |
JIEUN |
AN |
Korea |
Kumoh National Institute of Technology |
STRUCTURES AND PHYSICAL PROPERTIES OF PVDF/GRAPHENE NANOCOMPOSITES PREPARED BY SOLUTION MIXING AND MELT-COMPRESSION |
| Nanocomposites |
P3-22 |
Aug. 24th |
Gil Woo |
Jeon |
Korea |
Kumoh National Institute of Technology |
STRUCTURES AND PHYSICAL PROPERTIES OF CELLULOSE DRIVATIVE/EXFOLIATED GRAPHITE NANOCOMPOISTES PREPARED BY MELT-SHEAR MIXING |
| Nanocomposites |
P3-23 |
Aug. 24th |
Eunsoo |
Kang |
Korea |
Inha University |
DEVELOPMENT OF ANTI-CORROSION COATING SOLUTION USING SURFACE MODIFIED METAL NANOPARTICLES FOR STEEL SHEET |
| Nanocomposites |
P3-24 |
Aug. 24th |
Dae Woo |
Lee |
Korea |
Chonbuk National University |
CURING BEHAVIORS AND MECHANICAL PROPERTIES OF THERMOSETTING VINYL ESTER/ GO NANOCOMPOSITE |
| Nanocomposites |
P3-25 |
Aug. 24th |
Trung |
Truong |
Korea |
Chonbuk National Univeristy |
PREPARATION OF NANOCOMPOSITE BASED ON FUNCTIONALIZED GRAPHENE NANOPLATELET AND EPOXY-ACRYLATE BIFUNCTIONAL POLYSILOXANES |
| Nanocomposites |
P3-26 |
Aug. 24th |
Seung-Yeol |
Jeon |
Korea |
Seoul National University |
STRENGTH PREDICTION OF CARBON NANOTUBE YARNS USING STRUCTURAL MECHANICS APPROACH |
| Nanocomposites |
P3-27 |
Aug. 24th |
Elena |
Danshina |
Russia |
Belgorod State University |
RELAXOR PROPERTIES OF THE CERAMIC SOLID SOLUTIONS IN SrTiO3-BiScO3 SYSTEM |
| Nanocomposites |
P3-28 |
Aug. 24th |
Galina |
Forental |
Russia |
South Ural State University |
STRENGTH PREDICTION OF EPOXY NANOCOMPOSITE |
| Nanocomposites |
P3-29 |
Aug. 24th |
Sukanya |
Nilmoung |
Thailand |
Santi Maensiri |
FABRICATION, STRUCTURE, AND MAGNETIC PROPERTIES OF CARBON/NiFe2O4 COMPOSITE NANOFIBERS |
| Nanocomposites |
P3-30 |
Aug. 24th |
Hyunsu |
Kim |
Korea |
Inha University |
STRUCUTURE AND PHOTOLUMINESCENCE PROPERTIES OF TeO2-CORE/TiO2-SHELL NANOWIRES |
| Nanocomposites |
P3-31 |
Aug. 24th |
jinho |
Lee |
Korea |
Division of Materials Science and Engineering, Hanyang Univ. |
SYNTHESYS OF NANO-SIZED PLATINUM BY POLYOL PROCESS |
| Nanocomposites |
P3-32 |
Aug. 24th |
Joon-Suk |
Oh |
Korea |
Sungkyunkwan University |
FABRICATION OF AMINE-FUNCTIONALIZED POLY(GLYCIDYL METHACRYLATE)/GRAPHENE OXIDE CORE-SHELL MICROSPHERE |
| Nanocomposites |
P3-33 |
Aug. 24th |
Kunwoo |
Kim |
Korea |
ReCAMM |
Properties of ferromagnetic and magnetorheological fluids prepared with medium of polyethylene glycol |
| Nanocomposites |
P3-34 |
Aug. 24th |
Jung-Yeul |
Yun |
Korea |
KIMS |
PREPARATION OF Pt-Fe ALLOY NANPARTICLES BY ELECTRICAL WIRE EXPLOSION PROCESS |
| Nanocomposites |
P3-35 |
Aug. 24th |
Seung Il |
Jung |
Korea |
DH Holdings Co., LTD |
Control of mechanical propeties according to content ratio of copper coated carbon nanotubes in aluminum composite |
| Nanocomposites |
P3-36 |
Aug. 24th |
Seung Bin |
Park |
Korea |
Honam petrochemical corporation |
THE EXTUSION FOAMING OF TPEV/CLAY NANOCOMPOSITE |
| Nanocomposites |
P3-37 |
Aug. 24th |
Yeonsu |
Jung |
Korea |
Soongsil University |
Fabrication of Continuous Carbon Nanotube Fibers |
| Nanocomposites |
P3-38 |
Aug. 24th |
Jinkyu |
Roh |
Korea |
Kwangwoon University |
COLORIMETIC DETECTION OF METAL IONS WITH TWEEN COATED GOLD NANOPARTICLE |
| Nanocomposites |
P3-39 |
Aug. 24th |
chung-soo |
kang |
Korea |
Chungju National University |
Synthesis and Electrochemical Properties of LiNi⅓Co⅓Mn⅓O2 cathode materials by electrospun process |
| Nanocomposites |
P3-40 |
Aug. 24th |
Eun Kwang |
Park |
Korea |
Korea Atomic Energy Research Institute |
AN INVESTIGATION ON STABILITY OF Y2O3 AND SINTERING BEHAVIOR OF FE-BASE ODS PARTICLES PREPARED BY HIGH ENERGY BALL MILLING |
| Nanocomposites |
P3-41 |
Aug. 24th |
Il-yong |
Kang |
Korea |
Sogang University |
COMPATIBILITY OF ORGANOSILICATE NANOHYBRIDS BY TGA AND DIELECTRIC RELAXATION ANALYSIS |
| Nanocomposites |
P3-42 |
Aug. 24th |
JeongHwan |
Yoon |
Korea |
KyungHee University |
PREPARATION AND CHARACTERIZATION OF POLYPROPYLENE/FUNCTIONALIZED GRAPHENE NANOCOMPOSITES |
| Nanocomposites |
P3-43 |
Aug. 24th |
Min Kyu |
Kang |
Korea |
Korea Electronics Technology institute |
CHARATERISTICS OF CONDUCTIVE INK USING OCTANETHIOLATED COPPER NANOPARTICLES PRODUCED VIA INERT-GAS CONDENSATION |
| Nanocomposites |
P3-44 |
Aug. 24th |
Jaegeun |
Lee |
Korea |
POSTECH |
THE EFFECT OF BOTTOM ALIGNMENT OF CARBON NANOTUBE FOREST ON ITS SPINNABILITY |
| Nanocomposites |
P3-45 |
Aug. 24th |
kwang hoon |
lee |
Korea |
soongsil univeristy |
PREPARATION AND CHARACTERIZATION OF CONDUCTIVE ELECTROSPUN POLYPYRROLE NANOFIBERS CONTAINING MULTI-WALL CARBON NANOTUBES |
| Nanocomposites |
P3-46 |
Aug. 24th |
Se Youn |
Cho |
Korea |
Inha University |
CELLULOSE NANOCRYSTALS WITH HIGH THERMAL STABILITY AND THEIR NANOCOMPOSITES WITH POLY(LACTIC ACID) |
| Nanocomposites |
P3-47 |
Aug. 24th |
ALI |
GRINOU |
Korea |
Inha University |
THE EFFECTS OF ANILINE AS A STABILIZER FOR Pt NANOPARTICLES DOPED ONTO THE SURFACE OF REDUCED GRAPHENE OXIDE |
| Nanocomposites |
P3-48 |
Aug. 24th |
So Young |
Yim |
Korea |
Korea university |
THE EFFECT OF GROWTH TEMPERATURE ON THE EPITAXIAL GROWTH BY CHEMICAL VAPOR DEPOSITION OF VERTICALLY ALIGNED ZnO NANOWIRES |
| Nanocomposites |
P3-49 |
Aug. 24th |
Joon-Hyung |
Byun |
Korea |
Korea Institute of Materials Science |
FABRICATON OF POLYDOPAMINE EMBEDDED REDUCED GRAPHENE OXIDE PAPER |
| Nanocomposites |
P3-50 |
Aug. 24th |
Jun Hee |
Lee |
Korea |
Chungnam National University |
MICROSTRUCTURAL EVOLUTION OF CU-AG IN-SITU COMPOSITES PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING (ECAP) |
| Nanocomposites |
P3-51 |
Aug. 24th |
Moon-Kwang |
Um |
Korea |
Korea Institute of Materials Science |
Relationship between dispersion and UV-visible transmittance in nanocarbons reinforced composites |
| Nanocomposites |
P3-52 |
Aug. 24th |
Hyeon-Seong |
Choe |
Korea |
Korea Institute of Material Science |
ELECTROMAGNETIC WAVE ABSORBING PROERTIES OF CO NANO POWDER AND CARBON NANO-FIBERS EMBEDDED COMPOSITES |
| Nanocomposites |
P3-53 |
Aug. 24th |
Lingappan |
Niranjanmurthi |
Korea |
Pukyong National University |
Surface
functionalization of Multi-walled Carbon nanotubes with Random
Copolymer:Synthesis, characterization and Properties |
| Nanocomposites |
P3-54 |
Aug. 24th |
Seong Ho |
Ahn |
Korea |
Chungbuk National University |
WOOD/POLYPROPYLENE COMPOSITES WITH IMPROVED PERFORMANCE |
| Nanocomposites |
P3-55 |
Aug. 24th |
Gyu Wan |
Han |
Korea |
Hanyang University |
Hybrid
inorganic/organic nanocomposites consisting of CuInS2-ZnS core-shell
quantum dots embedded in a poly(methylmethacrylate) matrix |
| Nanocomposites |
P3-56 |
Aug. 24th |
Byung-Joo |
Kim |
Korea |
Jeonju Institute of Machinery and Carbon Composite |
Roles of Ni/CNTs Hybridization on Rheological and Mechanical Properties of CNTs/Epoxy Nanocomposites |
| Nanocomposites |
P3-57 |
Aug. 24th |
Su Jin |
Cha |
Korea |
Hanyang University |
PREPARATION AND CHARATERIZATION OF INORGANIC NANOPARTICLES AND NANOCOMPOSITES FOR SENSING MATERIALS |
| Nanocomposites |
P3-58 |
Aug. 24th |
Gwangseok |
Song |
Korea |
Chonbuk National University |
ELECTRICAL AND THERMAL PROPERTIES OF NANOCOMPOSITES FILLED WITH HYBRIDS OF GRAPHENE OXIDE AND SILVER NANOWIRE |
| Nanocomposites |
P3-59 |
Aug. 24th |
Dinh Huong |
Nguyen |
Korea |
Chonbuk National University |
PREPARATION AND CHARACTERIZATION OF TIO2 / GRAPHENE HYBRID BY SOL-GEL PROCESS ASSISTED WITH MICROWAVE IRRADIATION |
| Nanocomposites |
P3-60 |
Aug. 24th |
Jason |
Yoon |
Korea |
Kyungwon University |
Fabrication of Conductive and Transparent Single Walled Carbon Nano Tube Film with PEDOT |
| Nanocomposites |
P3-61 |
Aug. 24th |
NGUYEN |
AN |
Korea |
Pukyong National University |
GOLD/SEMI-FLUORINATED BLOCK COPOLYMER NANOCOMPOSITES DEVELOPED IN THIN FILM WITH ANNEALING |
| Nanocomposites |
P3-62 |
Aug. 24th |
Sung Hwan |
Kim |
Korea |
Seoul National University |
FABRICATION OF HYBRID FILM GRAPHENE/SINGLE-WALL CARBON NANOTUBE BY THERMAL TREATMENT |
| Nanocomposites |
P3-63 |
Aug. 24th |
Kyung Tae |
Kim |
Korea |
Korea Institute of Materials Science |
FABRICATION PROCESS OF ALUMINA NANOPARTICLES-DISPERSED-THERMOELECTRIC COMPOSITE POWDERS |
| Recycling |
P3-64 |
Aug. 24th |
Yunseong |
Lee |
Korea |
Hanbat National University |
A
STUDY OF THE STRENGTH PROPERTIES AS DETERMINED BY THE CAO CONTENTS AND
SI/AL LOW-CARBON ECO-FRIENDLY INORGANIC COMPOSITE, USING INDUSTRIAL BY
PRODUCTS |
| Recycling |
P3-65 |
Aug. 24th |
Dan |
Akesson |
Sweden |
University of Boras |
RECYCLING OF THERMOSET COMPOSITES BY MICROWAVE PYROLYSIS |
| Recycling |
P3-66 |
Aug. 24th |
Myeong-seop |
Byeon |
Korea |
Gyeongsang National University |
RECOVERY AND PURIFICATION OF CERIUM FROM GLASS POLISHING SLURRY |
| Recycling |
P3-67 |
Aug. 24th |
Soon Man |
Hong |
Korea |
Korea Institute of Science |
RHEOLOGICAL AND PHYSICAL PROPERTIES OF DECROSS-LINKED POLYETHYLENE FOAMS USING EXTRUDER |
| Recycling |
P3-68 |
Aug. 24th |
Wen |
Guo |
Korea |
Pusan National University |
PRODUCTION OF MCM-41 FROM RICE HUSK |
| Recycling |
P3-69 |
Aug. 24th |
Han Na |
Kim |
Korea |
Chonbuk National University |
PREPARATION AND PROPERTIES OF COPOLYMERS OF EPOXY RESIN AND DEPOLYMERIZATE OF POLYURETHANE SCRAPS |
| Recycling |
P3-70 |
Aug. 24th |
Jiajun |
Lin |
China |
Harbin Institute of Technology |
RECYCLING
OF WASTED PRINTED CIRCUIT BOARDS IN NEAR-CRITICAL WATER AND THE EFFECTS
OF REACTION CONDITIONS ON THE DECOMPOSITION RATE |
| Structural Response and Design |
P3-71 |
Aug. 24th |
JOSE MIGUEL |
MOLINES CANO |
Spain |
Universidad Politecnica de Valencia |
DEVELOPMENT AND APPLICATIONS OF GLASS FIBER BARS AS A REINFORCED IN CONCRETE STRUCTURES |
| Structural Response and Design |
P3-72 |
Aug. 24th |
Hee Keun |
Cho |
Korea |
KAIST Satellite Technology Research Center |
LARGE DISPLACEMENT ANALYSIS OF SHAPE MEMORY ALLOY FIBER REINFORCED LAMINATE COMPOSITE |
| Structural Response and Design |
P3-73 |
Aug. 24th |
Taeseong |
Kim |
Denmark |
Risø DTU |
DEVELOPING ANISOTROPIC BEAM ELEMENT FOR DESIGN OF COMPOSITE WIND TURBINE BLADES |
| Structural Response and Design |
P3-74 |
Aug. 24th |
Shutian |
Liu |
China |
Dalian University of Technology |
compliance optimization of laminates with restricted fiber volume using lamination paramters |
| Applications of Composites |
P4-01 |
Aug. 25th |
Jae Wook |
Jang |
Korea |
Sunchon National University |
Solubility
effect of CH3CHO and its mediated electrochemical oxidation in micellar
composite solution: An electro-reactor study |
| Applications of Composites |
P4-02 |
Aug. 25th |
MeeHye |
OH |
Korea |
Korea Automotive Technology Institute |
THE DEVELOPMENT OF THERMAL CONDUCTIVE COMPOSITE MATERIAL FOR HEATSINK |
| Bio-inspired Composites |
P4-03 |
Aug. 25th |
JE WOOK |
CHAE |
Korea |
Agency for Defense Development |
A Study on the Behavior Analysis of Human Right Arm under Impact Condition |
| Damage and Fracture |
P4-04 |
Aug. 25th |
Youngtae |
Cho |
Korea |
Jeonju University |
LOAD CARRYING CAPACITY OF BROKEN ELLIPSOIDAL INHOMOGENEITY AND CRACK EXTENDED IN PARTICLE REINFORCED COMPOSITES |
| Energy Technology Applications |
P4-05 |
Aug. 25th |
Mi Yeong |
Kim |
Korea |
Korea Electric Power Corporation |
DYNAMIC ANALYSIS DURING DISTURBANCES USING IGCC OTS (OPERATOR TRAINING SYSTEM) |
| Experimental Techniques |
P4-06 |
Aug. 25th |
Jong-Bin |
Yeo |
Korea |
Chonnam National University |
A STUDY ON THE MULTIPLE-EXPOSURE NANOSPHERE- LITHOGRAPHY FOR UNIQUE PHOTONIC CRYSTAL |
| Experimental Techniques |
P4-07 |
Aug. 25th |
Xiuhua |
Chen |
China |
Shanghai JiaoTong University |
THE RESIDUAL STRENGTH TEST AND ANALYSIS OF COMPOSITE RUDDER AFTER LIGHTNING STRIKE |
| Experimental Techniques |
P4-08 |
Aug. 25th |
So Hyang |
Shin |
Korea |
Kwangwoon University |
PREPARATION OF GOLD-CHIP WITH OH-AFFINITY FOR SURFACE PLASMON RESONANCE SENSOR BY MICRO-CONTACT PRINTING |
| Experimental Techniques |
P4-09 |
Aug. 25th |
HWASUN |
PARK |
Korea |
SUNGKYUNKWAN UNIVERSITY |
FABRICATION OF UNIFORM SQUARE-SHAPED TUNNEL PITS BY ELECTROCHEMICAL ETCHING ON ALUMINUM FOIL |
| Fibres, Matrices and Interfaces |
P4-10 |
Aug. 25th |
Phaophuttra |
Thummanukitcharoen |
Thailand |
Chulalongkorn University |
PREPARATION OF ORGANOSILANE TREATED MICROCRYSTALLINE CELLULOSE (SIMCC) AND THE POLYPROPYLENE/ SIMCC COMPOSITE |
| Fibres, Matrices and Interfaces |
P4-11 |
Aug. 25th |
wasana |
onnongpong |
Thailand |
chulalongkorn university |
PRERATION OF POLYPROPYLENE/POLYPROPYLENE GRAFTED CHITOSAN COMPOSITE |
| Fibres, Matrices and Interfaces |
P4-12 |
Aug. 25th |
Won Jong Sung |
Won |
Korea |
Chungnam National University |
THE EFFECT OF SURFACE MODIFICATION ON INTERFACE OF POLYKETONE FIBER AND RUBBER |
| Fibres, Matrices and Interfaces |
P4-13 |
Aug. 25th |
Nattakarn |
Hongsriphan |
Thailand |
Silpakorn University |
Synthetic and natutal dyeing of wood fibers in wood-plastiic composite |
| Fibres, Matrices and Interfaces |
P4-14 |
Aug. 25th |
Bharat |
Bajaj |
Korea |
Korea Research Institute of Chemical Technology |
STUDY
OF WELL ALIGNED CONTINUOUS ELECTROSPUN NANOFIBERS OF POLY
(AMIDE-COIMIDE)/POLY (TRIMELLITIC ANHYDRIDE CHLORIDE-CO-4,
4’-METHYLENEDIANILINE) USING SOLVENT MIXTURE OF DMSO/THF |
| Fibres, Matrices and Interfaces |
P4-15 |
Aug. 25th |
Juhea |
Kim |
Korea |
Korea Institute of Industrial Technology |
The efffect of composite structure on the bullet protection efficiency |
| Fibres, Matrices and Interfaces |
P4-16 |
Aug. 25th |
Jin Woo |
Yi |
Korea |
Korea Institute of Materials Science (KIMS) |
A STUDY OF THE EFFECT OF POLYDIMETHYLSILOXANE ON LOW TEMPERATURE PROPERTIES OF EPOXY RESIN |
| Fibres, Matrices and Interfaces |
P4-17 |
Aug. 25th |
Heon-Young |
Jeong |
Korea |
Seoul National University |
Preparation of Biodegradable Thermoplastic using Acetylated Kraft Lignin |
| Fibres, Matrices and Interfaces |
P4-18 |
Aug. 25th |
Dong Chan |
Lim |
Korea |
Korea Institute of Materials Science |
THE EFFECTS OF DIRECTLY GROWN CARBON NANOSTRUCTURES ON THE WETTABILITY BETWEEN CF-EPOXY |
| Fibres, Matrices and Interfaces |
P4-19 |
Aug. 25th |
Kyu Hwan |
Lee |
Korea |
Korea Institute of Materials Science |
ANCHORAGE OF ELECTROCHMICALLY GROWN ZNO NANOWIRES ON CF AND WETTABILITY WITH EPOXY |
| General Industrial Applications |
P4-20 |
Aug. 25th |
JUNG HA |
KIM |
Korea |
KOLON Industries,INC |
Comparison of the mechanical property and the ballistic behavior in Heracron®/phenol composite via plasma treatment |
| General Industrial Applications |
P4-21 |
Aug. 25th |
Dong Sik |
Bae |
Korea |
Changwon National University |
SYNTHESIS AND CHARACTERIZATION OF ZNCO2O4 NANOPARTICLES BY REVERSE MICELLE PROCESSING |
| Health Monitoring |
P4-22 |
Aug. 25th |
Zhifang |
Zhang |
Australia |
UNSW@ADFA |
Vibration Monitoring of Composite Laminates with Delamination Damage |
| Health Monitoring |
P4-23 |
Aug. 25th |
Yanzi |
Yin |
China |
Wuhan University of Technology |
PREPARATION OF A SIMPLE HEAT-RESISTANT COATING OF THE OPTICAL FIBER EMBEDDED IN COMPOSTIES |
| Health Monitoring |
P4-24 |
Aug. 25th |
Hui Yun |
Hwang |
Korea |
Andong National University |
Estimation
of Electric Charge Signals for Piezoelectric damage monitoring of Glass
Fiber Epoxy Composites by Finite Element Method |
| Health Monitoring |
P4-25 |
Aug. 25th |
Hyuk-Jin |
Yoon |
Korea |
Korea Railroad Research Institute |
AN EXPERIMENTAL STUDY ON STRAIN DISTRIBUTION OF BONDED JOINT UISNG OPTICAL FIBER SENSOR |
| Joints and Bearing Behavior |
P4-26 |
Aug. 25th |
Sergei |
Sapozhnikov |
Russia |
South Ural State University |
ENCHANCED BONDED COMPOSITE JOINTS BY SMALL DIAMETER SCREWS |
| Joints and Bearing Behavior |
P4-27 |
Aug. 25th |
WOO GEUN |
LEE |
Korea |
University of Science & Technology |
STRENGTH EVALUATION OF T-JOINT STRUCTURES FOR THE COMPOSITE BOGIE FRAME UNDER BENDING |
| Mechanical and Physical Properties |
P4-28 |
Aug. 25th |
Juil |
Yoon |
Korea |
Hansung University |
THE
EFFECTIVE THERMAL CONDUCTIVITY OF SQUARE LATTICE STRUCTURE OF HIGH
FILLER LOADING COMPOSITES USING FINITE ELEMENT SIMULATION |
| Metal Matrix Composites |
P4-29 |
Aug. 25th |
Shota |
Takiguchi |
Japan |
Hiroshima University |
FABRICATION OF INTERMETALLIC COMPOUND DISPERSED ALUMINUM MATRIX COMPOSITES BY POROUS NICKEL |
| Metal Matrix Composites |
P4-30 |
Aug. 25th |
Ha-Guk |
Jeong |
Korea |
Korea Institute of Industrial Technology |
A
ROLE OF INTERFACE STRUCTURE FOR SUPERIOR PLASTIC DEFORMATION IN
Al-Mg-Si ALLOY COMPOSITES CONTAINING CERAMICS REINFORCEMENTS |
| Metal Matrix Composites |
P4-31 |
Aug. 25th |
Takeshi |
Harimoto |
Japan |
Hiroshima university |
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al2O3 / A336 COMPSITE BY LOW PRESSURE INFILTRATRION |
| Metal Matrix Composites |
P4-32 |
Aug. 25th |
Maciej |
Dyzia |
Poland |
Silesian University of Technology |
TECHNOLOGICAL ASPECTS OF PRODUCTION HETEROPHASE (SIC + C) COMPOSITE SUSPENSIONS |
| Metal Matrix Composites |
P4-33 |
Aug. 25th |
Yishi |
Su |
France |
Institute Charles Delaunay, UTT |
STUDY OF COMPRESSIVE PROPERTIES OF METAL POROUS POLYMER COMPOSITES UNDER DIFFERENT TEMPERATURE CONDITIONS |
| Metal Matrix Composites |
P4-34 |
Aug. 25th |
Sławomir |
Mamica |
Poland |
A. Mickiewicz University |
TUNING OF THE SPIN-WAVE BAND STRUCTURE IN 2D MAGNETIC COMPOSITES |
| Metal Matrix Composites |
P4-35 |
Aug. 25th |
Anna |
Dolata-Grosz |
Poland |
Silesian University of Technology |
EFECT OF CHEMICAL COMPOSITION OF THE ALLOY ON ALUMINIUM/CARBON FIBRES COMPOSITE STRUCTURE |
| Metal Matrix Composites |
P4-36 |
Aug. 25th |
Gue Serb |
Cho |
Korea |
Korea Institute of Industrial Technology |
Decoratioin of carbon nanotubes with copper particles by metal displacement reaction |
| Metal Matrix Composites |
P4-37 |
Aug. 25th |
Shion |
Yim |
Korea |
Pusan National University |
ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF HYBRID SHORT FIBER+PARTICLE REINFORCED METAL MATRIX COMPOSITES |
| Metal Matrix Composites |
P4-38 |
Aug. 25th |
Jaehee |
Kim |
Korea |
Seoul National University |
Evolution of Microstructures and Mechanical Properties of W-x vol.%ZrC after Post-Heat Treatment |
| Metal Matrix Composites |
P4-39 |
Aug. 25th |
Su-Hyeon |
Kim |
Korea |
Korea Institute of Materials Science |
THERMOMECHANICAL PROCESSING OF IN SITU Al-Cu/TiC/Al2O3 COMPOSITE |
| Metal Matrix Composites |
P4-40 |
Aug. 25th |
Tae Hyuk |
Lee |
Korea |
Chungnam University |
INTERFACTICAL CHARACTERISTICS OF Al/Cu COMPOSITE MATERIALS DURING SOLID-STATE DEFORMATION PROCESS |
| Metal Matrix Composites |
P4-41 |
Aug. 25th |
Bong-Jae |
Choi |
Korea |
Sungkyunkwan University |
Reinforcement Distribution and Related Mechanical Properties of Titanium Matrix Composites by Investment Casting |
| Metal Matrix Composites |
P4-42 |
Aug. 25th |
Seong-Jin |
Hong |
Korea |
Korea Institute of Materials Science |
THERMAL CONDUCTIVITY AND EXPANSION OF MAGNESIUM ALLOY MATRIX COMPOSITES BY LIQUID PRESSING PROCESS |
| Metal Matrix Composites |
P4-43 |
Aug. 25th |
Hui |
Yu |
China |
Shandong University,KIMS |
EFFECTS OF SIC PARTICULATES ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ91 MAGESIUM MATRIX COMPOSITES |
| Metal Matrix Composites |
P4-44 |
Aug. 25th |
Yun Soo |
Lee |
Korea |
Inha University |
FABRICATION OF ALUMINUM COMPOSITES REINFORCED WITH STAINLESS STEEL TRUSS STRUCTURE |
| Metal Matrix Composites |
P4-45 |
Aug. 25th |
Jung-Moo |
Lee |
Korea |
Korea Institute of Materials Science |
MICROSTRUCTURES AND THERMAL PROPERTIES OF LIQUID-PRESSED A356/SICP COMPOSITES |
| NDE Technologies |
P4-46 |
Aug. 25th |
Martin |
Rheinfurth |
Germany |
University of Stuttgart |
Non-contact ultrasound for single-sided detection of fatigue and defects in composites |
| NDE Technologies |
P4-47 |
Aug. 25th |
Yohei |
Shinyama |
Japan |
Toyohashi University of Technology |
STUDY OF POSSIBILITY TO PREDECT INITIATION SITE OF DESTRUCTION OF FLAT BRAIDED CFRP BY SQUID-NDE |
| NDE Technologies |
P4-48 |
Aug. 25th |
HEE SANG |
PARK |
Korea |
Korea Research Institute of Standard |
DETECTING DEFECTS OF COMPOSITE MATERIALS BY USING INFRARED THERMOGRAPHY |
| NDE Technologies |
P4-49 |
Aug. 25th |
WonTae |
Kim |
Korea |
Kongju National University |
QUANTITATIVE ASSESSMENT OF THE DETECTION OF DEFECTS BY THERMOGRAPHIC INSPECTION IN VIBRATION MACHINERY MODE |
| NDE Technologies |
P4-50 |
Aug. 25th |
Soonho |
Won |
Korea |
Korea Institute of Materials Science |
ULTRASONIC EVALUATION OF PROCESS DEFECTS IN CNT-BASED CARBON/CARBON COMPOSITES |
| Others |
P4-51 |
Aug. 25th |
Jun ho |
Kim |
Korea |
Korea University of Technology and Education |
SYNTHESIS AND CHARACTERIZATION OF ACRYLIC RUBBER |
| Others |
P4-52 |
Aug. 25th |
Mansur |
Ahmad |
Malaysia |
Universiti Teknologi Mara |
STUDY
ON BONDING STRENGTH OF BAMBOO/BAMBOO UNIDIRECTIONAL LAMINATE WITH UF
AND PF-EFFECT OF PRESSING TIME ON ADHESIVE BONDING STRENGTH |
| Others |
P4-53 |
Aug. 25th |
Min Su |
Kim |
Korea |
Korea University of Technology and Education |
STUDY
ON THE MORPHOLOGY OF THE POLYURETHANE SYNTHESIZED FROM 4,4’ ?
DIPHENYLMETHANE DIISOCYANATE AND POLY(TETRAMETHYLENE GLYCOL) |
| Others |
P4-54 |
Aug. 25th |
Soook |
Hwang |
Korea |
Korea University of Technology and Education |
SYNTHESIS AND MECHANICAL PROPERTIES OF POLYURETHANE/MONTMORILLONITE NANOCOMPOSITES |
| Others |
P4-55 |
Aug. 25th |
Joon-seop |
Song |
Korea |
Hanyang University |
INFULENCE OF HUMIDITY ON PROPERTIES OF NAFION® MEMBRANE |
| Others |
P4-56 |
Aug. 25th |
Jun-Mo |
Koo |
Korea |
Hanyang University |
SYNTHESIS
OF DOUBLE WALL MICROCAPSULES OF M-F COMPOSITE, DETERMINING ITS
ENCAPSULATION EFFICIENCY AND SHELL YIELD WITH SUITABLE PH |
| Probabilistic Approaches and Design |
P4-57 |
Aug. 25th |
Xiaoguang |
Xue |
China |
National University of Defence Technology |
THE APPLICATION OF RELIABILITY BASED OPTIMIZATION OF TOPHAT STIFFENED COMPOSITE PANELS UNDER BIDIRECTIONAL BUCKLING LOAD |
| Probabilistic Approaches and Design |
P4-58 |
Aug. 25th |
Seokje |
Lee |
Korea |
Chungnam National University |
THE RELIABILITY-BASED PROBABILISTIC APPROACH FOR COMPOSITE TAIL PLANE STRUCTURES |
| Processing and Manufacturing Technologies |
P4-59 |
Aug. 25th |
Mingyu |
Lee |
Korea |
Inha University |
A STUDY ON SEPARATING FORCE BETWEEN LAMINATE COMPOSITE PART AND TOOL |
| Processing and Manufacturing Technologies |
P4-60 |
Aug. 25th |
Sang-Soo |
Chee |
Korea |
Seoul National University of Science & Technology |
SYNTHESIS OF SILVER NANOPARTICLES ON SILVER FLAKES TO ENHANCE ELECTRICAL PROPERTIES IN ISOTROPIC CONDUCTIVE ADHESIVES |
| Processing and Manufacturing Technologies |
P4-61 |
Aug. 25th |
Masanori |
Hirano |
Japan |
Aichi Institute of Technology |
SYNTHESIS OF COMPOSITE NANOPARTICLES IN THE TiO2-SnO2 SYSTEM UNDER HYDROTHERMAL CONDITIONS |
| Processing and Manufacturing Technologies |
P4-62 |
Aug. 25th |
Keishi |
Honta |
Japan |
YAMAGATA UNIVERSITY |
FABRICATION OF MICRO-PATTERN OF QUARTZ GLASS IN INJECTION MOLDING PROCESS |
| Processing and Manufacturing Technologies |
P4-63 |
Aug. 25th |
Yoshiki |
Yomogida |
Japan |
National Institute of Advanced Industrial Science |
REACTIVE BLENDING OF POLYETHYLENE AND POLY(L-LACTIC ACID) USING A HIGH-SHEAR EXTRUDER |
| Processing and Manufacturing Technologies |
P4-64 |
Aug. 25th |
Meng-Heng |
Chuang |
Taiwan |
Feng Chia University |
MECHANICAL PROPERTIES OF CARBON/pCBT COMPOSITES PRODUCED BY RESIN TRANSFER MOLDING |
| Processing and Manufacturing Technologies |
P4-65 |
Aug. 25th |
Dong Joo |
Shin |
Korea |
Samsung Electro-Mechanics Co., LTD |
MECHANICAL AND THERMAL PROPERTIES OF EPOXY-INORGANIC FILLER SYSTEM ? EFFECT OF FAR INFRARED CURING |
| Processing and Manufacturing Technologies |
P4-66 |
Aug. 25th |
Ki-Hwan |
Kim |
Korea |
Korea Atomic Energy Research Institute |
FABRICATION OF SFR FUEL RODLETS FOR IRRADIATION TEST IN THE HANARO |
| Processing and Manufacturing Technologies |
P4-67 |
Aug. 25th |
Youngson |
Choe |
Korea |
Pusan National University |
Mechanical Characterization of PEEK/IM7 Fabricated Using an Automated Tape Placement Processing System |
| Processing and Manufacturing Technologies |
P4-68 |
Aug. 25th |
Ga-Yonug |
Gu |
Korea |
GyeongsangNationalUniversity |
COMPARISON OF OPTIMUM DRILLING CONDITIONS OF AIRCRAFT CFRP COMPOSITES USING CVD AND PCD TOOLS |
| Processing and Manufacturing Technologies |
P4-69 |
Aug. 25th |
Sung-Won |
Lee |
Korea |
Korea Electronics Technology Institute |
Characterization of Ag nanoparticles formed by encapsulation method with vacuum oil |
| Processing and Manufacturing Technologies |
P4-70 |
Aug. 25th |
SANG JIN |
Lee |
Korea |
Korea Institute of Footwear and Leather Technology |
MANUFCATURING PROCESS OF SANDWICH CRADLE FOR THE COMPUTED TOMOGRAPHY MEDICAL INSTRUMENT |
| Processing and Manufacturing Technologies |
P4-71 |
Aug. 25th |
junki |
park |
Korea |
Chungbuk national university |
effects of polymerization process variables on the properties of suspension polymerized toner |
| Processing and Manufacturing Technologies |
P4-72 |
Aug. 25th |
Jungeun |
Nam |
Korea |
KIMS, Korea Institute of Materials Science |
STUDY ON FABRICATION AND ELECTRIC PROPERTY OF B-STAGE RESIN FILMS CONTAINING CARBON NANAO MATERIALS |
| Repair Technologies |
P4-73 |
Aug. 25th |
Fan |
Zhou |
China |
Beijing University of Aeronautics and Astronautic |
Study on the Salvage of an Axial Penetrated Crack on the Composite Cylindrical Shell with a Reinforced Open Hole |
| Repair Technologies |
P4-74 |
Aug. 25th |
xiaojing |
gong |
France |
University of Burgundy |
NUMERICAL SIMULATION OF DAMAGE PROPAGATION IN CFRP LAMINATES REPAIRED BY EXTERNAL BONDED PATCHES UNDER TENSILE LOADING |
| Repair Technologies |
P4-75 |
Aug. 25th |
Shahram |
Aivazzadeh |
France |
University of Burgundy |
DESIGN AND OPTIMIZATION OF COMPOSITE LAMINATES REPAIRED BY BONDING EXTERNAL PATCHES |
| Sandwich Technologies |
P4-76 |
Aug. 25th |
Chongdu |
Cho |
Korea |
Inha University |
EXPERIMENTAL STUDY ON LOW VELOCITY IMPACT RESPONSE OF CFRP-ALUMINUM FOAM CORE SANDWICH PLATES |
| Textile Composites |
P4-77 |
Aug. 25th |
Ping |
Wang |
China |
Donghua University |
Tear and puncture behaviors of flexible composites |
| Textile Composites |
P4-78 |
Aug. 25th |
Yan |
Zhang |
China |
Donghua University |
Dynamic Responses of 3D Braided Carbon/Epoxy Composite |
| Textile Composites |
P4-79 |
Aug. 25th |
Shinya |
Kanamaru |
Japan |
University of Tsukuba |
Elastic-Viscoplastic Homogenization Analysis of Plain-Woven GFRP Laminates with Misaligned Plain Fabrics |
| Textile Composites |
P4-80 |
Aug. 25th |
Wonoh |
Lee |
Korea |
Korea Institute of Materials Science |
PREDICTION OF ANISOTROPIC THERMAL EXPANSION BEHAVIOR OF FIBER REINFORCED COMPOSITES AT CRYOGENIC TEMPERATURE |
| Wood and Paper |
P4-81 |
Aug. 25th |
Dukho |
Kim |
Korea |
Honam Petrochemical Corp. |
STUDY OF COUPLING AGENT FOR WOOD-PLASTIC COMPOSITE |
