| Session Title | Presentation Order | Date | First Name | Last Name | Country | Affiliation | Presentation Title |
|---|---|---|---|---|---|---|---|
| Nanocomposites and Polymer Nanocomposites including Carbon Nanotubes or Graphene | M19-1 | Aug. 22nd | Dong-Hun | Kim | Korea | KyungPook National university | THE EFFECTS OF THE MULTI-WALLED CARBON NANOTUBE(MWNT)/CELLULOSE NANOCOMPOSITES ON THEIR PHYSICAL PROPERTIES |
| Nanocomposites and Polymer Nanocomposites including Carbon Nanotubes or Graphene | M19-2 | Aug. 22nd | Sam | Na | New Zealand | Korea Advanced Institute of Science and Technology | BOND BEHAVIOR AND PERFORMANCE OF THE SPRAYED FRP ON CONCRETE SURFACE |
| Nanocomposites and Polymer Nanocomposites including Carbon Nanotubes or Graphene | M19-3 | Aug. 22nd | Pashupati | Pokharel | Korea | Chonbuk National University | SELECTIVE REINFORCEMENT OF THE HARD SEGMENT OF POLYURETHANE WITH GRAPHENE OXIDES |
| Nanocomposites and Polymer Nanocomposites including Carbon Nanotubes or Graphene | M19-4 | Aug. 22nd | Myungsoo | Kim | Korea | BK21 Industry Academy Changwon National University | Prediction of Two-Dimensional Electrical Conductivity of Graphene/Polymer Composites |
| Nanocomposites and Polymer Nanocomposites including Carbon Nanotubes or Graphene | M19-5 | Aug. 22nd | KAP SEUNG | YANG | Korea | Chonnam National University | ELECTRODE PROPERTIES OF OXY-GRAPHENE/PAN-BASED CARBON NANOFIBER COMPOSITES FOR SUPERCAPACITOR |
| Nanocomposites and Polymer Nanocomposites including Carbon Nanotubes or Graphene | M19-6 | Aug. 22nd | Toshio | Ogasawara | Japan | Japan Aerospace Exploration Agency (JAXA) | EFFECT OF SILANE FUNCTIONALIZATION ON THE MECHANICAL PROPERTEIS OF MWNT / EPOXY COMPOSITES |
| Structural Response and Design/Structural Response and Design/Structural Response and Design | M20-1 | Aug. 22nd | Renaud | Gutkin | United Kingdom | Imperial College London | PRACTICAL APPLICATION OF FAILURE MODELS TO PREDICT THE RESPONSE OF COMPOSITE STRUCTURES |
| Structural Response and Design/Structural Response and Design/Structural Response and Design | M20-2 | Aug. 22nd | Sung Jin | Lim | Korea | Chosun University | A STUDY ON IMPACT DAMAGE ANALYSIS AND TEST OF COMPOSITE LAMINATE FOR AIRCRAFT REPAIRABLE DESIGN |
| Structural Response and Design/Structural Response and Design/Structural Response and Design | M20-3 | Aug. 22nd | JUNG-SUN | PARK | Korea | Korea Aerospace University | NONLINEAR CONSTANT LIFE MODEL FOR FATIGUE LIFE PREDICTION OF COMPOSITE MATERIALS |
| Multi-functional Composites | M21-1 | Aug. 22nd | Joel Renaud | GNIDAKOUONG | Korea | UNIST | MULTISCALE HYBRID COMPOSITES FOR EMI SHIELDING |
| Multi-functional Composites | M21-2 | Aug. 22nd | Jinbong | Kim | Korea | Korea Institute of Materials Science | STUDY ON FABRICATION OF CARBON NANOCOMPOSITE SHEETS AND APPLICATION TO THE MICROWAVE ABSORBERS |
| Multi-functional Composites | M21-3 | Aug. 22nd | Jongmin | Son | Korea | Hanyang University | EXPERIMENTAL STUDY ON SHEAR STRENGTH FOR ULTRA-HIGH PERFORMANCE CONCRETE BEAM |
| Multi-functional Composites | M21-4 | Aug. 22nd | LEI | LI | Korea | Pusan National University | ELECTRICAL AND OPTICAL PROPERTIES OF COMPOSITE TRANSPARENT CONDUCTING OXIDE THIN FILMS |
| Multi-functional Composites | M21-5 | Aug. 22nd | NAM SEO | GOO | Korea | Konkuk University | CHARACTERISTICS OF A PIEZOCOMPOSITE GENERATING ELEMENT |
| Multi-functional Composites | M21-6 | Aug. 22nd | Inpil | KANG | Korea | Pukyong National University | NANO CARBON MATERIAL BASED ELECTROCHEMICAL ACTUATORS |
| Processing and Manufacturing Technologies | M22-1 | Aug. 22nd | Alberto | Sanchez | Switzerland | ETH Zurich | Indicators for optimizing cure temperature of paste adhesives |
| Processing and Manufacturing Technologies | M22-2 | Aug. 22nd | Hirohito | Hira | Japan | Daido University | STUDY ON CUTTING OF CFRP PLATE BY FIBER LASER |
| Processing and Manufacturing Technologies | M22-3 | Aug. 22nd | Frank | Gommer | United Kingdom | The University of Nottingham | NON-UNIFORMITY OF THE FILAMENT DISTRIBUTION IN FIBRE BUNDLES AND ITS EFFECT ON DEFECT FORMATION IN LIQUID COMPOSITE MOULDING |
| Processing and Manufacturing Technologies | M22-4 | Aug. 22nd | Alfred | Loos | U.S.A. | Michigan State University | SIMULATION OF RESIN INFUSION IN THE MANUFACTURE OF FIBER METAL LAMINATES BY VARTM |
| Processing and Manufacturing Technologies | M22-5 | Aug. 22nd | Xuqiang | Ma | China | Beihang University | Effect of Processing Methods on Consolidation of Cobonding T-stiffened Skin Structure Using Autoclave |
| Processing and Manufacturing Technologies | M22-6 | Aug. 22nd | Yan-Xia | LI | China | Beihang University | Defect Prediction in Composites Based on Numerical Simulation and Expertise Knowledge |
| Damage and Fracture | M23-1 | Aug. 22nd | John | Wang | Australia | Defence Science and Technology Organisation | ENHENCING PREDICTION ACCURACY IN SIFT THEORY |
| Damage and Fracture | M23-2 | Aug. 22nd | Vadim | Silberschmidt | United Kingdom | Loughborough University | DAMAGE IN FIBRE-REINFORCED COMPOSITE LAMINATES SUBJECTED TO DYNAMIC LOADING |
| Damage and Fracture | M23-3 | Aug. 22nd | Saju | Pillai | Denmark | Aalborg University | INFLUENCE OF FIBER-MATRIX ADHESION ON MECHANICAL PROPERTIES OF GLASS/POLYBUTYLENE TEREPHTHALATE UNIDIRECTIONAL COMPOSITES |
| Damage and Fracture | M23-4 | Aug. 22nd | David | Fishpool | United Kingdom | BAE Systems | PREFERENTIAL ENERGY ABSORBING INTERFACES FOR BALLISTIC AND STRUCTURAL APPLICATIONS |
| Damage and Fracture | M23-5 | Aug. 22nd | Andrew | Litchfield | Australia | Royal Melbourne Institute of Technology | DISSIPATED ENERGY BASED DAMAGE MODELLING IN CFRP NOTCHED COUPONS WITH MULTI-AXIAL FAILURE DATA |
| Damage and Fracture | M23-6 | Aug. 22nd | Jan | Both | Germany | Technical University of Munich | Mode II delamination of CFRP-metal laminates at bolted joints |
| Nanocomposites | M24-1 | Aug. 22nd | Michael | Russ | United Kingdom | University of Bristol | DEVELOPMENT OF CARBON NANOTUBE/EPOXY NANOCOMPOSITES FOR LIGHTNING STRIKE PROTECTION. |
| Nanocomposites | M24-2 | Aug. 22nd | Tsu-Wei | Chou | U.S.A. | University of Delaware | CARBON NANOTUBE FIBERS: CHALLENGES AND OPPORTUNITIES |
| Nanocomposites | M24-3 | Aug. 22nd | Handong | Cho | Korea | Dept. of Mechanical Engineering, Postech | ARTIFICIAL LOTUS LEAF STRUCTURES MADE BY BLASTING WITH SODIUM BICARBONATE |
| Nanocomposites | M24-4 | Aug. 22nd | Rie | Nakamura | Japan | Nihon University | Effect of halloysite nanotubes on tensile properties and interfacial property between carbon fiber and epoxy resin |
| Nanocomposites | M24-5 | Aug. 22nd | Pimjai | Saengkwamsawang | Thailand | Faculty of Science, Khon Kaen University | FABRICATION AND CHARACTERIZATION OF α -Al2O3 NANOPARTICLES REINFORCED POLYAMIDE 6 COMPOSITE FILAMENTS |
| Symposium on'Multifunctional Design for Energy Efficient Systems (II)' | M25-1 | Aug. 22nd | Nathan | Salowitz | U.S.A. | Stanford Unifersity | Development of a bio-inspired stretchale network for intelligent composites |
| Symposium on'Multifunctional Design for Energy Efficient Systems (II)' | M25-2 | Aug. 22nd | wonbong | choi | U.S.A. | Florida International University | Carbon Nanomaterials - The Route Toward Applications in Energy |
| Symposium on'Multifunctional Design for Energy Efficient Systems (II)' | M25-3 | Aug. 22nd | zoubeida | ounaies | Tunisia | Pennsylvania State University | NANOPARTICLE-ENHANCED POLYMERS FOR ELECTROMECHANICAL ACTUATION AND ENERGY STORAGE |
| Symposium on'Multifunctional Design for Energy Efficient Systems (II)' | M25-4 | Aug. 22nd | H. Jerry | Qi | U.S.A. | University of Colorado | DESIGN CONSIDERATIONS FOR SHAPE MEMORY POLYMER COMPOSITES WITH MAGNETO-SENSITIVE PARTICLES |
| Symposium on'Multifunctional Design for Energy Efficient Systems (II)' | M25-5 | Aug. 22nd | Nakhiah | Goulbourne | U.S.A. | University of Michigan | Microstructure and Material Characterization of Bat Wing Tissue for Active Skin Composites |
| Symposium on'Multifunctional Design for Energy Efficient Systems (II)' | M25-6 | Aug. 22nd | James | Joo | U.S.A. | Air Force Research Laboratory | Load-Bearing multi-functional structure with Direct Thermal harvesting for thermally activated Reconfigurable wing Design |
| Green Composites | M26-1 | Aug. 22nd | S. | Sujito | Indonesia | University of Jember | MECHANICAL PROPERTIES OF “GREEN” COMPOSITES BASED ON POLY-LACTIC ACID RESIN AND SHORT SINGLE BAMBOO FIBERS |
| Green Composites | M26-2 | Aug. 22nd | Warunee | Ariyawiriyanan | Thailand | Rajamangala University of Technology Thanyaburi | THE INFLUENCE OF THERMAL AGEING ON MECHANICAL PROPERTIES OF GREEN RUBBER COMPOSITE |
| Green Composites | M26-3 | Aug. 22nd | Aisyah | Alias | Malaysia | Institute of Forestry and Forest Product (INTROP) | EFFECTS OF DIFFERENT THERMO-MECHANICAL REFINING PRESSURE ON THE PERFORMANCE OF MEDIUM DENSITY FIBREBOARD (MDF) MADE FROM KENAF (Hibiscus cannabinus L.) CORE |
| Green Composites | M26-4 | Aug. 22nd | Jonathan | Chard | United Kingdom | University of Surrey | Green Composites: Sustainability and Mechanical Performance |
| Green Composites | M26-5 | Aug. 22nd | Debes | Bhattacharyya | New Zealand | University of Auckland | COMPOSITE HOLLOW CORE HIGH-END BIO-PANELS |
| Green Composites | M26-6 | Aug. 22nd | Andrea | Wechsler | Australia | University of New South Wales | PHYSICAL PROPERTIES OF FURNITURE PANELS FROM MACADAMIA SHELLS |
| Applications of Composites | M27-1 | Aug. 22nd | Xavier | Soldani | Spain | university CARLOS III of Madrid | NUMERICAL MODELING OF DELAMINATION DURING MACHINING OF LFRP COMPOSITES |
| Applications of Composites | M27-2 | Aug. 22nd | Daniel | Weck | Germany | TU Dresden | CONCEPTION AND MANUFACTURING OF A LIGHTWEIGHT LEAF SPRING WITH ADJUSTABLE SPRING RATE |
| Applications of Composites | M27-3 | Aug. 22nd | Venkatesh | S | India | National Aerospace Laboratories | DESIGN, DEVELOPMENT AND CERTIFICATION OF COMPOSITE REAR PRESSURE BULKHEAD FOR A LIGHT TRANSPORT AIRCRAFT |
| Applications of Composites | M27-4 | Aug. 22nd | Orito | Yuta | Japan | The university of Tokyo | BASIC STUDY ON JOINT STRENGTH OF WELDING FOR CARBON FIBER REINFORCED THERMOPLASTIC |
| Applications of Composites | M27-5 | Aug. 22nd | Hiroki | Wada | Japan | The University of Tokyo | DEFORMATION EVALUATION OF ELASTIC COMPOSITE BLADE MODELS FOR A TIDAL POWER GENERATION BY FLUID-STRUCTUARE INTERACTION ANALYSIS |
| Applications of Composites | M27-6 | Aug. 22nd | Yusuke | Hara | Japan | The University of Tokyo | PERFOMRANCE EVALUATION OF COMPOSITE MARINE PROPELLER FOR A FISHING BOAT BY FLUID-STRUCTURE INTERACTION ANALYSIS |
| High Performance Composites/Sensing and Intefacial properties of Nanocomposites | M28-1 | Aug. 22nd | Hyungu | Im | Korea | Chung-Ang University | FABRICATION OF NOVEL POLYURETHANE ELASTOMER COMPOSITES CONTAINING HOLLOW GLASS MICROSPHERES AND THEIR UNDERWATER APPLICATIONS |
| High Performance Composites/Sensing and Intefacial properties of Nanocomposites | M28-2 | Aug. 22nd | Jaeho | Choi | Korea | Agency for Defense Development | MECHANICAL AND DIELECTRIC PROPERTIES OF E-GLASS FIBER / MWNTS DISPERSED EPOXY COMPOSITES |
| High Performance Composites/Sensing and Intefacial properties of Nanocomposites | M28-3 | Aug. 22nd | Andrea | Guerriero | Italy | IIT - Italian Institute of Technology | AN EXHAUSTIVE CHARACTERIZATION OF QUANTUM TUNNELLING CONDUCTIVE COMPOSITE |
| High Performance Composites/Sensing and Intefacial properties of Nanocomposites | M28-4 | Aug. 22nd | Jie | Zhang | China | Leibniz-Institut fur Polymerforschung Dresden | FUNCTIONAL EPOXY COMPOSITES WITH MWNTS-GLASS FIBRES |
| High Performance Composites/Sensing and Intefacial properties of Nanocomposites | M28-5 | Aug. 22nd | Zuo-Jia | Wang | Korea | Gyeongsang National University | DISPERSION EVALUATION AND INTERFACIAL SENSING OF CARBON FIBER/CNT-PHENOLIC COMPOSITES USING ELECTRO-MICROMECHANICAL TECHNIQUE |
| High Performance Composites/Sensing and Intefacial properties of Nanocomposites | M28-6 | Aug. 22nd | Young-Bin | Park | Korea | Ulsan National Institute of Science and Technology | Strain Sensors Using Carbon Nanomaterial Based Polymer Composites |
| Metal Matrix Composites | M29-1 | Aug. 22nd | Hui | Chen | China | University of Science Technology Beijing | Effect of Cr addition and processing conditions on interface microstructure and thermal conductivity of diamond/Cu composite |
| Metal Matrix Composites | M29-2 | Aug. 22nd | Yunpeng | Jiang | China | Hohai university | Incremental damage theory of particulate-reinforced composites with a ductile interphase |
| Metal Matrix Composites | M29-3 | Aug. 22nd | Johann | Riesch | Germany | Max-Planck-Institute for Plasma Physics | Tungsten-fiber reinforced tungsten composites: A novel concept for improving the toughness of tungsten |
| Metal Matrix Composites | M29-4 | Aug. 22nd | Seyed Abdolkarim | Sajjadi | Iran | Ferdowsi University of Mashhad | MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AL-AL2O3 MICRO AND NANO COMPOSITES FABRICATED BY STIR CASTING ROUTE |
| Tsai award | M30-1 | Aug. 22nd | Yun | Gao | China | National Center for Nanoscience and Technology | High Mechanical Performance of Graphene Oxide-Poly(vinyl alcohol) Layered Nanocomposites |
| Tsai award | M30-2 | Aug. 22nd | Muhammad Zahir | Iqbal | Spain | Universitat Politecnica de Catatluyna | IMPEDANCE CHARACTERIZATION OF TRANSPARENT AND FLEXIBLE CARBON NANOTUBES THIN FILM NETWORKS |
| Tsai award | M30-3 | Aug. 22nd | Soraia | Pimenta | United Kingdom | Imperial College London | Micromechanics of recycled composites for material optimisation and eco-design |
| Tsai award | M30-4 | Aug. 22nd | Federico | Gasco | U.S.A. | University of Washington | Wireless strain gage for testing and health monitoring of carbon fiber composites |
| Tsai award | M30-5 | Aug. 22nd | Denni | Kurniawan | Korea | Dongguk University | PLASMA POLYMERIZATION OF BASALT FIBER/POLYLACTIC ACID COMPOSITES: EFFECTS ON MECHANICAL PROPERTIES |
| Fibres, Matrices and Interfaces | M31-1 | Aug. 22nd | Su | Bai | United Kingdom | Imperial College London | ATMOSPHERIC PLASMA POLYMERISATION OF CARBON FIBRES: IMPACT ON ADHESION TO POLYURETHANE ELASTOMER |
| Fibres, Matrices and Interfaces | M31-2 | Aug. 22nd | zhao | tong | China | Institute of Chemistry,Chinese Academy of Sciences | Thermal and mechanical properties of several phthalonitrile resin system |
| Fibres, Matrices and Interfaces | M31-3 | Aug. 22nd | Mikhail | Malanin | Germany | Leibniz-Institut of Polymer Research Dresden | Coatings for improved adhesion strength and resistance of glass cord |
| Fibres, Matrices and Interfaces | M31-4 | Aug. 22nd | Hongxin | Liu | China | Beihang University | Relationship of interface fracture energy and interlaminar shear strength of carbon fiber reinforced composite under hydrothermal treatment |
| Fibres, Matrices and Interfaces | M31-5 | Aug. 22nd | Yibin | Li | China | Harbin Institute of Technology | EFFECT OF PAMAM LAYER ON THE INTERFACE PROPERTIES OF CARBON FIBER REINFORCED EPOXY MATRIX COMPOSITES |
| Fibres, Matrices and Interfaces | M31-6 | Aug. 22nd | Xiaowen | Yuan | New Zealand | The University of Auckland | Voids characterisation in carbon fibre/epoxy composite laminates |
| Structural Response and Design | M32-1 | Aug. 22nd | Du | Zhenyong | China | Harbin Institute of Technology | WRINKLING CHARACERISTIC OF MEMBRANE INFLATED TRUNCATED CONE |
| Structural Response and Design | M32-2 | Aug. 22nd | Kosuke | Oka | Japan | Nagoya University | Design of CFRP with fibers placed by using an embroidery machine |
| Structural Response and Design | M32-3 | Aug. 22nd | Christopher | York | United Kingdom | University of Glasgow | HYGRO-THERMALLY CURVAURE-STABLE LAMINATES WITH NON-STANDARD PLY ORIENTATIONS |
| Structural Response and Design | M32-4 | Aug. 22nd | Manoj Kumar | Dhadwal | Korea | Konkuk University | EXPERIMENTAL VALIDATION OF CROSS-SECTIONAL ANALYSIS FOR COMPOSITE ROTOR BLADES |
| Structural Response and Design | M32-5 | Aug. 22nd | Hak Gu | Lee | Korea | Korea Institute of Materials Science | Optimal design of composite inserts for a hybrid ultracentrifuge rotor |
| Structural Response and Design | M32-6 | Aug. 22nd | Jaehoon | Lim | Korea | Seoul National University | STRUCTURAL INTEGRITY DESIGN OF A COMPOSITE WING IN A TILTROTOR AIRCRAFT |
| Smart Actuations and its Applications/Smart Structure and Materials | M33-1 | Aug. 22nd | Shinya | Honda | Japan | Hokkaido University | DESIGN OF SMART COMPOSITE FOR VIBRATION SUPPRESSION USING LAMINATION PARAMETERS |
| Smart Actuations and its Applications/Smart Structure and Materials | M33-2 | Aug. 22nd | Shanyi | Du | China | Harbin Institute of Technology | SMART COMPOSITE MATERIALS AND THEIR APPLICATIONS |
| Smart Actuations and its Applications/Smart Structure and Materials | M33-3 | Aug. 22nd | Krishna | Challagulla | Canada | Laurentian University | Electromechanical Response of Piezoelectric Foams |
| Smart Actuations and its Applications/Smart Structure and Materials | M33-4 | Aug. 22nd | Ki Soo | Kim | Korea | Hongik University | FIBER OPTIC SMART MONITORING OF KOREA EXPRESS RAILWAY TUNNEL STRUCTURES |
| Processing and Manufacturing Technologies | M34-1 | Aug. 22nd | Huajie | Shi | Netherlands | TU Delft | Modelling of heat transfer and consolidation for thermoplastic composites resistance welding |
| Processing and Manufacturing Technologies | M34-2 | Aug. 22nd | Chaobo | Xin | China | Beihang University | Study on thermal expansion pressure and resin pressure variation during thermal expansion molding process |
| Processing and Manufacturing Technologies | M34-3 | Aug. 22nd | Jozsef | Kovacs | Hungary | Budapest University of Technology and Economics | Fiber reinforcement induced warpage on injection molded thermoplastics |
| Processing and Manufacturing Technologies | M34-4 | Aug. 22nd | Oxana | Weber | Germany | Karlsruhe Institute of Technology | MOLDING COMPOUNDS BASED ON PARTIALLY WATER-SOLUBLE ORGANIC BINDER FOR PRODUCTION OF COMPLEX SHAPED CERAMIC MICRO PARTS |
| Processing and Manufacturing Technologies | M34-5 | Aug. 22nd | Bian | Li-ping | China | EFFECT OF DISTRIBUTION MEDIUM ON RESIN FLOW BEHAVIOR IN VACUUM INFUSION MOLDING PROCESS | |
| Processing and Manufacturing Technologies | M34-6 | Aug. 22nd | TSUNG-WU | CHEN | Taiwan | National Taiwan University | FEASIBILITY STUDY OF SHEARING THICKENING FLUID (STF) DAMPERS |
| Damage and Fracture | M35-1 | Aug. 22nd | Anna | Scott | United Kingdom | University of Southampton | HIGH RESOLUTION DAMAGE DETECTION OF LOADED CARBON/EPOXY LAMINATES USING SYNCHROTRON RADIATION COMPUTED TOMOGRAPHY |
| Damage and Fracture | M35-2 | Aug. 22nd | Manuel | Kempf | Germany | University of Bayreuth | EFFECT OF IMPACT DAMAGE ON THE COMPRESSION FATIGUE PERFORMANCE OF GLASS AND CARBON FIBRE REINFORCED COMPOSITES |
| Damage and Fracture | M35-3 | Aug. 22nd | Masahito | Ueda | Japan | Nihon University | COMPRESSIVE STRENGTH OF A CARBON FIBER IN MATRIX |
| Damage and Fracture | M35-4 | Aug. 22nd | Haritz | Zabala | Spain | Mondragon Unibertsitatea | CONCEPTION OF CRASH TESTS FOR COMPOSITE TUBULAR STRUCTURES |
| Damage and Fracture | M35-5 | Aug. 22nd | Delphine | Carrella-Payan | United Kingdom | Bristol University | Tensile testing characterization of asymmetrically tapered composite laminates |
