Session Title Presentation Order Date First Name Last Name Country Affiliation Presentation Title
Nanocomposites W01-1 Aug. 24th VIJAYA RANGARI U.S.A. TUSKEGEE UNIVERSITY THERMAL AND MECHANICLA PROPERTIES OF MICROWAVE CURED SiC/ EPOXY NANOCOMPOSITES
Nanocomposites W01-2 Aug. 24th Ram Mohan U.S.A. North Carolina A&T State University THERMOPHYSICAL AND TENSILE BEHAVIOR OF HYBRID EPOXY COMPOSITES WITH BORON CARBIDE PARTICULATES
Nanocomposites W01-3 Aug. 24th Luqi Liu China National Center for Nanoscience and Technology THE INFLUENCE OF SUPRAMOLECULAR MICROSTRUCTURES ON THE LOAD TRANSFER EFFICIENCY FOR SINGLE CARBON NANOTUBE FIBER EMBEDDED POLYPROPYLENE COMPOSITES
Nanocomposites W01-4 Aug. 24th Hulya Cebeci Turkey MIT/ITU MECHANICAL BEHAVIOUR OF WAVINESS-DOMINATED CONTROLLED MORPHOLOGY ALIGNED CARBON NANOTUBE POLYMER COMPOSITES: MODELING STUDY CORRELATED WITH EXPERIMENTS
Nanocomposites W01-5 Aug. 24th Limin GAO China Beihang University DAMAGE SENSING IN FIBER COMPOSITES USING NON-UNIFORMLY DISPERSED CARBON NANOTUBES
Textile Composites W02-1 Aug. 24th Stepan Lomov Belgium Katholieke Universiteit Leuven MECHANICAL BEHAVIOUR OF NON-CRIMP 3D WOVEN CARBON/EPOXY COMPOSITE UNDER IN-PLANE TENSILE LOADING
Textile Composites W02-2 Aug. 24th Valter Carvelli Italy Politecnico di Milano FATIGUE BEHAVIOR OF A 3D BRAIDED CARBON/EPOXY COMPOSITE
Textile Composites W02-3 Aug. 24th Edward Archer United Kingdom University of Ulster IMPACT DAMAGE ANALYSIS OF 3D WOVEN CARBON FIBRE COMPOSITES USING COMPUTED TOMOGRAPHY
Textile Composites W02-4 Aug. 24th Yuzo Fujita Japan Osaka University A PROPOSAL OF FE MODELING OF UNIDIRECTIONAL COMPOSITE CONSIDERING UNCERTAIN MICRO STRUCTURE
Textile Composites W02-5 Aug. 24th Richard Protz Germany TU Dresden CHARATERISATION AND MODELLING OF THE HIGHLY DYNAMIC DEFORMATION AND FAILURE BEHAVIOR OF PREVIOUSLY FATIGUED 3D TEXTILE COMPOSITES
Textile Composites W02-6 Aug. 24th Xuesen Zeng United Kingdom University of Nottingham MODELLING COMPACTION EFFECT ON PERMEABILITY OF 3D CARBON REINFORCEMENTS
Durability of Polymer Matrix Composites W03-1 Aug. 24th Monssef Drissi-Habti France IFSTTAR THE MECHANICAL EFFECTS OF DENSE UV-RADIATION ON PULTRUDED POLYMER-MATRIX
Durability of Polymer Matrix Composites W03-2 Aug. 24th Michelle Salvia France Ecole Centrale Lyon CHARACTERISATION OF HEXTOOL COMPOSITE FOR RTM MOULDS
Durability of Polymer Matrix Composites W03-3 Aug. 24th Bing Han China Beijing Jiaotong University CREEP OF FULLY OR PARTIALLY FRP-CONFINED SQUARE OR CIRCULAR CONCRETE COLUMNS
Durability of Polymer Matrix Composites W03-4 Aug. 24th Masahiro Kotani Japan Waseda University Damage Accumulation and Lifetime Prediction of Woven GFRP Under Constant Tensile Load Test in Hydrochloric Acid Solution
Durability of Polymer Matrix Composites W03-5 Aug. 24th Pei Sun China Beihang University Effect of cyclic hygrothermal aging and drying temperature on the interfacial properties of BMI/Carbon fiber composite
Durability of Polymer Matrix Composites W03-6 Aug. 24th Nadia BAHLOULI France IMFS-Universite de Strasbourg DYNAMIC BEHAVIOR OF VIRGIN AND RECYCLED PP/EPR AND PP/EPDM/TALC MATERIALS FOR CAR BUMPERS
Aerospace Applications W04-1 Aug. 24th yanju liu China Harbin Institute of Technology ELECTROACTIVE POLYMER AND ITS COMPOSITES: THEORY, EXPERIMENT AND APPLICATIONS
Aerospace Applications W04-2 Aug. 24th Kyriaki Kalaitzidou U.S.A. Georgia Institute of Technology DIELECTRIC BEHAVIOR AND THERMO-MECHANICAL PERFORMANCE OF BATIO3 REINFORCED AND CARBON REINGORCED EPOXY COMPOSITES
Aerospace Applications W04-3 Aug. 24th Brian Wardle U.S.A. Massachusetts Institute of Technology MULTI-PHYSICS NANO-ENGINEERED STRUCTURAL DAMAGE DETECTION AND DE-ICING
Aerospace Applications W04-4 Aug. 24th Robert Haynes U.S.A. The University of Texas at Arlington HYGROTHERMALLY STABLE LAMINATES WITH EXTENSION-TWIST AND BEND-TWIST COUPLINGS
Aerospace Applications W04-5 Aug. 24th Yousry Shaheen Egypt Professor in the Engineering College STRUCTURAL BEHAVIOUR OF REINFORCED CONCRETE COLUMNS REINFORCED WITH VARIOUS MATERIALS
Aerospace Applications W04-6 Aug. 24th Hua Jin Finland Helsinki University of Technology SUPERHYDROPHOBIC AND SUPEROLEOPHOBIC NANOCELLULOSE AEROGEL AS BIOINSPIRED CARGO CARRIERS ON WATER AND OIL
Research and Development of Green Composites W05-1 Aug. 24th Seung-Hwan Lee Japan Advanced Industrial Science and Technology, Japan CELLULOSE NANOFIBER PREPARATION BY STEAM OR OZONE TREATMENT/MECHANICAL FIBRILLATION AND ITS APPLICATION FOR NANOCOMPOSITE
Research and Development of Green Composites W05-2 Aug. 24th Kenichi Takemura Japan Kanagawa University Effect of surface modification on flexural properties of jute fiber green composites
Research and Development of Green Composites W05-3 Aug. 24th Junji Noda Japan Yamaguchi university TENSILE PROPERTY IMPROVEMENT BY CYCLIC LOADING TREATMENT FOR RAMIE/PP COMPOSITES
Research and Development of Green Composites W05-4 Aug. 24th Terence Tumolva Philippines University of the Philippines EVALUATING THE CARBON STORAGE POTENTIAL OF FURAN RESIN-BASED GREEN COMPOSITES
Research and Development of Green Composites W05-5 Aug. 24th Junko Koike Japan Doshisha University Effct of Needle Punching on Strength of Stampable Sandwich Sheet Fabricated with Bamboo Fiber and Recycled Carbon Fiber Mat
Research and Development of Green Composites W05-6 Aug. 24th Laurent Bizet France Universite du Havre COMPARISON BETWEEN GLASS AND FLAX NON-CRIMP STITCHED FABRICS
Experimental Techniques W06-1 Aug. 24th Yi HOU France Ecole des Mines de Douai TRANSIENT AIR PERMEABILITY MEASUREMENT OF FIBROUS REINFORCEMENT
Experimental Techniques W06-2 Aug. 24th Yoshihisa Tanaka Japan National Institute for Materials Science MULTI-SCALE DEFORMATION BEHAVIOR IN HYBRID CFRP OBSERVED BY IN-SITU FE-SEM
Experimental Techniques W06-3 Aug. 24th Min Li China Beihang University Comparison of Wettability and Capillary Effect Evaluated by Different Characterizing Methods
Experimental Techniques W06-4 Aug. 24th Ubaldo Pineda Spain Universidad Cardenal Herrera EXPERIMENTAL EVALUATION OF HEAT TRANSFER MEASUREMENTS DURING LCM PROCESSES BY INTRUSIVE AND NON-INTRUSIVE HEAT FLUX SENSORS
Experimental Techniques W06-5 Aug. 24th Modesto Mateos Spain Mondragon Unibertsitatea CHARACTERISATION OF IMPACT BEHAVIOUR OF CARBON FIBRE LAMINATES
Experimental Techniques W06-6 Aug. 24th Stuart Lemanski United Kingdom University of Cambridge CHARACTERISATION OF WAVINESS DEFECTS IN INDUSTRIAL COMPOSITE SAMPLES
Experimental Techniques W06-7 Aug. 24th Yanan Liu China Beihang University A NOVEL APPROACH TO CHARACTERIZE TORSIONAL PROPERTY OF SINGLE FIBER
Textile Composites W07-1 Aug. 24th Guodong Fang China Harbin Institute of Technology Experimental and numerical study of mechanical properties of three dimensional four-directional braided composites
Textile Composites W07-2 Aug. 24th Tao Zeng China Harbin University of Science and Technology Helix geometry model and mechanical property of 3D braided composites
Textile Composites W07-3 Aug. 24th Mark Pankow U.S.A. University of Michigan THE HIGH RATE DEFORMATION RESPONSE OF 3D WOVEN COMPOSITES
Textile Composites W07-4 Aug. 24th Ozgur Demircan Japan Kyoto Institute of Technology TENSILE PROPERTIES AND FINITE ELEMENT MODELING OF BIAXIAL WEFT KNITTED COMPOSITES
Textile Composites W07-5 Aug. 24th Louise van der Werff Australia CSIRO Formation of Novel Composite Fibres Exhibiting Thermochromic Behaviour
Textile Composites W07-6 Aug. 24th Philip Harrison United Kingdom University of Glasgow MODELLING VARIABILITY OF TOW ORIENTATION FOR WOVEN TEXTILE COMPOSITES
Fibres, Matrices and Interfaces W08-1 Aug. 24th Vladimir Kudinov Russia Russian Academy of Sciences THE EFFECT OF THE BONDIG BETWEEN THE HPPE FIBER AND THE MATRIX ON THE PROPERTIES AND THE FRACTURE MODE OF POLYMERIC COMPOSITE MATERIALS
Fibres, Matrices and Interfaces W08-2 Aug. 24th Niclas Wiegand Germany Leibniz Institut fur Polymerforschung Dresden e.V. Nano reinforced interfaces for advanced glass fibre/epoxy composites
Fibres, Matrices and Interfaces W08-3 Aug. 24th Samuel Charca Denmark Aalborg University EVALUATION OF THE INTERFACE STRENGTH IN METAL/POLYMER COMPOSITE SYSTEMS
Fibres, Matrices and Interfaces W08-4 Aug. 24th Joung-Man Park Korea Gyeongsang National University INTERFACIAL EVALUATION OF TRANSPARENT AND CONDUCTIVE CNT AND ITO COATINGS ON PET SUBSTRATES WITH NANO-STRUCTURAL ASPECTS
Fibres, Matrices and Interfaces W08-5 Aug. 24th Dong-Jun Kwon Korea Gyeongsang National University MICROFAILURE MECHANISMS AND INTERFACIAL EVALUATION OF SINGLE FIBER REINFORCED EPOXY COMPOISTES AT CRYOGENIC TEMPERATURES
Fibres, Matrices and Interfaces W08-6 Aug. 24th CHANG SEON BANG Korea KAIST FRACTURE TOUGHNESS ENHANCEMENT WITH REINFORCING FIBERS FOR ADHESIVELY BONDED JOINTS UNDER REPEATED THERMAL SHOCKS
Structural behaviour of composites subjected to impact and blast/ Impact and Dynamic Response
W09-1 Aug. 24th Jiangfeng Dong China Sichuan University Structural behaviour of recycled concrete filled steel tube columns strengthened with CFRP sheets under axial loading
Structural behaviour of composites subjected to impact and blast/ Impact and Dynamic Response
W09-2 Aug. 24th Zhongwei GUAN United Kingdom University of Liverpool Estimate the peak load and perforation energy of fibre metal laminates subjected to low velocity impact
Structural behaviour of composites subjected to impact and blast/ Impact and Dynamic Response
W09-3 Aug. 24th Fabian Ehrich United Kingdom Imperial College London PREDICTING LOW VELOCITY IMPACT DAMAGE - A MIXED MODE DEGRADATION MODEL
Structural behaviour of composites subjected to impact and blast/ Impact and Dynamic Response
W09-4 Aug. 24th hu zhaohui China Beijing Composite Materials Co.,Ltd Evaluation Study on Composite Hull Structure Subjected to Slamming Loads
Structural behaviour of composites subjected to impact and blast/ Impact and Dynamic Response
W09-5 Aug. 24th Jaeyoung Lim Korea Hyundai Motor Company Effects of gage length and loading rates on the strength of PPTA fibers
Mechanical and Physical Properties W10-1 Aug. 24th Miroslav Cerny Czech Republic Czech Technical University, Klokner Institute BEHAVIOR OF SANDWICH BEAMS IN BENDING
Mechanical and Physical Properties W10-2 Aug. 24th Richard Lin New Zealand Centre for Advanced Composite Materials ELECTRICAL AND MECHANICAL PROPERTIES OF POLY(VINYLIDENE FLOURIDE) NANOFIBRILLAR MATERIALS
Mechanical and Physical Properties W10-3 Aug. 24th Jong-Won Lee Korea Korea Aerospace Research Institute FULLY ISOTROPIC LAMINATES MADE OF (0°, +45°, -45°, 90°) LAYERS WITH UP TO 24 PLIES
Mechanical and Physical Properties W10-4 Aug. 24th Jianguang Zhai Korea Changwon National University FINTE ELEMENT ANLYSIS OF THE MECHANICAL PROPERTIES OF WOVEN COMPOSITE
Mechanical and Physical Properties W10-5 Aug. 24th Buhm Park Korea Hanyang University DYNAMIC CHARACTERISTICS MEASUREMENT OF ULTRA-THIN SEMICONDUCTOR LAYER
Processing and Manufacturing Technologies W11-1 Aug. 24th Toshio Tanimoto Japan Shonan Institute of Technology A Cost-effective Fabrication Method for Continuous Fiber CMCs with Excellent Fracture Toughness
Processing and Manufacturing Technologies W11-2 Aug. 24th Kazuhiro Sakata Japan NIHON University DESIGN AND FABRICATION OF MICRO EV BODY MADE OF GFRP
Processing and Manufacturing Technologies W11-3 Aug. 24th Hirokazu Fujisaki Japan Nihon University Development and Evaluation of Mechanical Properties for Carbon Fabricļ¼¸Phenolic Composites with Injection Molding
Processing and Manufacturing Technologies W11-4 Aug. 24th ASAMI NAKAI Japan Kyoto Institute of Technology INTERFACIAL PROPERTY AND WELDING PROPERTY OF CONTINUOUS FIBER REINFORCEMENT THERMOPLASTIC COMPOSITE
Processing and Manufacturing Technologies W11-5 Aug. 24th Daisuke Hatano Japan Kyoto Institute of technolgy PULTRUSION SYSTEM FOR CONTINUOUS FIBER REINFORCED THERMOPLASTIC COMPOSITE WITH BRAIDING TECHNIQUE
Processing and Manufacturing Technologies W11-6 Aug. 24th Takayuki Shimizu Japan Mitsubishi Heavy Industries, Ltd. INVESTIGATION OF VISCOELASTICITY AND CURE SHRINKAGE IN AN EPOXY RESIN DURING PROCESSING
Damage Tolerance and Impact Session W12-1 Aug. 24th Richard Butler United Kingdom University of Bath THE INFLUENCE OF FIBRE ANGLE ON THE COMPRESSIVE STRENGTH OF DELAMINATED SURFACE PLIES
Damage Tolerance and Impact Session W12-2 Aug. 24th Jacques RENARD France ENSMP NON LOCAL APPROACH FOR PREDICTION OF DELAMINATION ONSET
Damage Tolerance and Impact Session W12-3 Aug. 24th Daniel Bull United Kingdom University of Southampton Composite Laminate Impact Damage Assessment by High Resolution 3D X-ray Tomography and Laminography
Damage Tolerance and Impact Session W12-4 Aug. 24th Minoo Rathnasabapathy Australia RMIT University NUMERICAL INVESTIGATION OF FIBRE-METAL LAMINATES SUBJECT TO IMPACT DAMAGE
Damage Tolerance and Impact Session W12-5 Aug. 24th Gang Zhou United Kingdom Loughborough University EXPERIMENTAL STUDY OF IN-PLANE COMPRESSIVE BEHAVIOUR OF UNSYMMETRICAL SANDWICH PANELS
Damage Tolerance and Impact Session W12-6 Aug. 24th Chun Wang Australia RMIT University DAMAGE TOLERANCE ANALYSIS OF ADHESIVELY BONDED REPAIRS TO COMPOSITES STRUCTURES
Polymer Nanocomposites and Their Applications W13-1 Aug. 24th Jozsef Karger-Kocsis South Africa Polymer Technology Sliding Wear Properties of Carbon Nanofiber and Nanotube Reinforced Rubbers
Polymer Nanocomposites and Their Applications W13-2 Aug. 24th Luu Dinh Vietnam Sungkyunkwan University ELECTRO-OSMOTIC DRAG EFFECT ON THE METHANOL PERMEATION FOR sPEEK AND NAFION MEMBRANES
Polymer Nanocomposites and Their Applications W13-3 Aug. 24th Zhimin Jiang China National Center for Nanoscience and Technology Low Density Polyethylene/MgO Nanocomposites as Insulation for HVDC Cables
Textile Composites W14-1 Aug. 24th Huiyu Sun China Nanjing University of Aeronautics and Astronautics ANALYSIS OF VISCOELASTICITY OF 3-D BRAIDED COMPOSITE MATERIALS
Textile Composites W14-2 Aug. 24th SAKODA Kentaro Japan Kyoto Institute of Technology ANALYSIS FOR MECHANICAL BEHAVIOR IN HYBRID BRAIDED COMPOSITE MATERIALS
Textile Composites W14-3 Aug. 24th Ki-Ju Kang Korea Chonnam National University A NEW CONCEPT OF FABRICATION OF SANDWICH PANELS WITH TRUSS-LIKE CELLUALR CORES
Durability of Polymer Matrix Composites W15-1 Aug. 24th Frederic Jacquemin France Universite de Nantes COUPLING MOISTURE DIFFUSION AND INTERNAL MECHANICAL STATES IN POLYMERS AND COMPOSITES ? A THERMODYNAMICAL APPROACH
Durability of Polymer Matrix Composites W15-2 Aug. 24th Xinying Lv China Harbin Institute of Technology AGING OF CARBON FIBER/BIS-MALEIMIDE COMPOSITES IN OXIDATIVE CONDITIONS
Durability of Polymer Matrix Composites W15-3 Aug. 24th Tohru Morii Japan Shonan Institute of Technology Hydrothermal aging of jute fiber reinforced polypropylene injection moldings
Aerospace Applications W16-1 Aug. 24th Lauren Burns Australia RMIT University Application of a bio-inspired design strategy to delay initial damage in a FRP T-joint under bending
Aerospace Applications W16-2 Aug. 24th D. Stefan Dancila U.S.A. The University of Texas at Arlington Composite Compliant Mechanism Based, Pitch-Controllable Rotor Blade Tips
Aerospace Applications W16-3 Aug. 24th Ramprasad Srinivasan India Mahindra Satyam Exact Solution of Shear Flexible Laminated Thin Walled I Beams using a Coupled Field Formulation
Research and Development of Green Composites W17-1 Aug. 24th Hitoshi Takagi Japan The University of Tokushima DEVELOPMENT OF HIGH STRENGTH BIOMASS COMPOSITES MADE FROM BAMBOO
Research and Development of Green Composites W17-2 Aug. 24th Hyun-Bum Kim Korea Yamaguchi University DEVELOPMENT OF A CONTINUOUIS RAMIE SINGLE YARN REINFORCED COMPOSITE STRAND
Research and Development of Green Composites W17-3 Aug. 24th Hyun-sup Lee Korea Honam Petrochemical Corp. Effect of Hybrid Compatibilizers on mechanical property of ternary blend with Polypropylene, Poly (lactic acid) and Toughening modifier
Experimental Techniques W18-1 Aug. 24th Luis Domenech Spain Universidad Cardenal Herrera ESTIMATION OF LOCAL PERMEABILITY WITH ARTIFICIAL VISION TECHNIQUES USING A DIRECT METHOD
Experimental Techniques W18-2 Aug. 24th Rachel Nicholls-Lee United Kingdom University of Southampton FULLY SUBMERGED COMPOSITE CRYOGENIC TESTING
Experimental Techniques W18-3 Aug. 24th Edu Ruiz Canada Ecole Polytechnique of Montreal CHEMICAL SHRINKAGE AND THERMOMECHANICAL CHARACTERIZATION OF AN EPOXY RESIN DURING CURE BY A NOVEL IN SITU MEASUREMENT METHOD
Textile Composites W19-1 Aug. 24th Smith Thitithanasarn Japan Kyoto Institute of Technology EFFECT OF SURFACE TREATMENT ON THERMAL AND MECHANICAL PERFORMANCE OF JUTE FABRIC REINFORCED ENGINEERING THERMOPLASTIC COMPOSITES
Textile Composites W19-2 Aug. 24th Satoshi Takahashi Japan Tokyo Metropolitan University FEM ANALYSIS ON OUT-OF-PLANE THERMAL EXPANSION IN PLAIN WEAVE COMPOSITE
Textile Composites W19-3 Aug. 24th Na Wang Korea Inha University Dynamic compressive properties of woven fabric reinforced composites

top