2007 ICCM-16 Kyoto Japan
Top
Invitation
Table of Sessions
Author Index
Organization & Sponsors
Strategic Alliance Partners and Other Information
ICCM-16 Sixteenth International Conference on Composite Materials

July/13 (Fri.) -- Room F

July -- 8(Sun.) / 9(Mon.) / 10(Tue.) / 11(Wed.) / 12(Thr.) / 13(Fri.)

July/13(Fri.) -- Room A / B-2 / F / G / H / I / J / K

Friday Morning (July 13) -- Room F: 9:20-14:20
Session Title: Composites Applications to Automobiles and Their Recycle (Specialist Session)
Name Affiliation Country Paper Title pdf
Organizers Goichi Ben Nihon University Japan
Koji Yamaguchi Toray Industries, Inc. Japan
Chairperson(s): Hideaki Kasano
Koji Yamaguchi Toray Industries, Inc. Japan ALSTECC PROGRAM: CHARACTARIZATION OF A SHORT CYCLE RTM FOR MASS PRODUCTION FrFM1-01
Masaaki Yamasaki Toray Industries, Inc. Japan
Ichiro Taketa Toray Industries, Inc. Japan
Eisuke Wadahara Toray Industries, Inc. Japan
Toshiya Kamae Toray Industries, Inc. Japan
Nao Sugimoto Nihon University Japan IMPACT PROPERTIES OF CFRP/AL HYBRID IMPACT BEAM FOR ABSORBING IMPACT ENERGY IN SIDE COLLISION OF AUTOMOBILES FrFM1-02
Goichi Ben Nihon University Japan
Yoshio Aoki Nihon University Japan
Ayako Takano NISSAN MOTOR CO.,LTD. Japan A quantity of energy absorption of a structure body made by CFRP FrFM1-03
Kyosuke Hakkaku NISSAN MOTOR CO.,LTD. Japan
Ichiro Taketa Toray Industries, Inc. Japan
Hyoung-Soo Kim Nihon University Japan COMPARISON OF EXPERIMENTAL RESULTS WITH FEM ONES OF RECTANGULAR CFRP TUBES FOR FRONT SIDE MEMBERS OF AUTOMOBILES FrFM1-04
Goichi Ben Nihon University Japan
Yoshio Aoki Nihon University Japan
Chairperson(s): Karl Schulte
Hiroyuki Hamada kyoto Institute of Technology Japan EFFECT OF COLLAPSE TRIGGER MECHANISM ON THE ENERGY ABSORPTION CAPABILITY OF FRP TUBES FrFM1-05
Yuqiu Yang kyoto Institute of Technology Japan
Asami Nakai kyoto Institute of Technology Japan
Yoshio Aoki Nihon University Japan DEVELOPMENT AND IMPACT BEHAVIORS OF CFRP GUARDER BELT FOR SIDE COLLISION OF AUTOMOBILES FrFM1-06
Goich Ben Nihon University Japan
Hyoung-Soo Kim Nihon University Japan
Gerald Rolf Kress ETH Zurich, Centre of Structure Technologies Switzerland CFRP TORSION SPRING: LOAD INTRODUCTION PROBLEM FrFM1-07
Paolo Ermanni ETH Zurich, Centre of Structure Technologies Switzerland
Shilian Hu Concordia University Canada Surface Finish of Composite Automobile Panels FrFM1-08
Suon V Hoa Concordia University Canada
R Ganesan Concordia University Canada
top

Friday Afternoon (July 13) -- Room F: 14:20-17:00
Session Title: Composites Applications to Automobiles and Their Recycle (Specialist Session)
Name Affiliation Country Paper Title pdf
Chairperson(s): Jun Takahashi
Valeria Antonelli Delft University of Technology Netherlands Structural Design of the Superbus FrFA1-01
Antonia Terzi Delft University of technology Netherlands
Hideaki Kasano Takushoku University Japan Chipping Failure of Automotive Coated Film Layers at Low Temperatures FrFA1-02
Osamu Hasegawa Takushoku University Japan
Nobuie Konishi Nobby Tech. Ltd., Japan
Chairperson(s): Yoshio Aoki
Karl Schulte Technische Universität Hamburg-Harburg Germany Optimisation of a pyrolysis process for recycling of CFRPs FrFA2-01
Leif Ole Meyer Technische Universität Hamburg-Harburg Germany
Erik Grove-Nielsen Refiber ApS Denmark
Jun Takahashi The University of Tokyo Japan MECHANICAL PROPERTIES OF RECYCLED CFRP BY INJECTION MOLDING METHOD FrFA2-02
Nobukuni Matsutsuka The University of Tokyo Japan
Tetsuya Okazumi The University of Tokyo Japan
Kiyoshi Uzawa The University of Tokyo Japan
Isamu Ohsawa The University of Tokyo Japan
Stephen J Pickering University of Nottingham UK Recycling Carbon Fibre/Epoxy Resin Composites using Supercritical Propanol FrFA2-03
Guozhan Jiang University of Nottingham UK
Edward Lester University of Nottingham UK
Paul Blood University of Nottingham UK
Nicholas Warrior University of Nottingham UK
Hajime Kishi Himeji Institute of Technology, University of Hyogo Japan Dismantlable epoxy adhesives for recycling of structural materials FrFA2-04
Yuichiro Inada Himeji Institute of Technology, University of Hyogo Japan
Jin Imade Himeji Institute of Technology, University of Hyogo Japan
Satoshi Matsuda Himeji Institute of Technology, University of Hyogo Japan
Chiaki Sato Tokyo Institute of Technology Japan
Chuntip Kumnuantip Rajamangala University of Technology Thanyaburi Thailand CERAMIC SCRAP LOADING IN THE UNSATURATED POLYESTER RESIN FrFA2-05
Alongkorn Yeela Rajamangala University of Technology Thanyaburi Thailand
Piyoros Krawnonkrow Rajamangala University of Technology Thanyaburi Thailand
Sarawut Dechboon Rajamangala University of Technology Thanyaburi Thailand
top
Copyright ICCM-16 Local Organizing Committee. All Rights Reserved.