Smart Materials and Smart Manufacturing


THE OPTIMIZED FIBER VOLUME FRACTION FOR MAGNETOELECTRIC COMPOSITES
Jin H. Huang, Wen-Long Dai, Hsien-Kuang Liu and Chao-Kuang Chen

FRACTURE CRITERIA FOR MULTIPLY CRACKED PIEZOELECTRIC MATERIALS
Jin H. Huang, Chieh-Hsuan Tsai, and Hsing-Chia Kuo

A MINIMALIST SENSOR SYSTEM FOR MOLD FILLING
Sylvia R.M. Kueh, Suresh G. Advani and Richard S. Parnas

RESEARCH AND DEVELOPMENT OF SMART GIANT MAGNETOSTRICTION COMPOSITE MATERIALS USING POWDER METALLURGIC TECHNOLOGY AND THEIR APPLICATIONS TO ADVANCED DEVICES
H. Eda, Y. Tomita, T. Mori, Y. Okada, J. Shimizu and L. Zhou

DAMAGE EVALUATION OF SMART CFRP-PIEZOCERAMIC-MATERIALS USING NON-DESTRUCTIVE METHODS
Gerhard Mook , Juergen Pohl, Fritz Michel, Thomas Benziger

OPTICAL FIBER SENSOR TO MONITOR THE CHEMICAL DEGRADATION OF FRP
Tomonori Tomiyama, Ken Tsuda, Masatoshi Kubouchi

SMART COMPOSITES APPLIED TO CONTINUOUS IN-SERVICE DAMAGE
Cyril TAMIATTO, Patricia KRAWCZAK, JosÚ PABIOT and Fabrice LAURENT

NOVEL DIELECTRIC SENSOR SETUP FOR FLOW AND CURE MONITORING IN RESIN TRANSFER MOULDING
Alexandros A. Skordos, Panagiotis I. Karkanas and Ivana K. Partridge

0-3 PIEZO-ELECTRIC COMPOSITES DESIGN TO THE SHAPE CONTROL OF STRUCTURES
F. Erba, F. Thiebaud, D. Perreux, M. Troccaz

SURFACE AND BULK STRESS/ STRAIN MEASUREMENTS IN COMPOSITE LAMINATES WITH A FIBRE-OPTIC RAMAN PROBE
Costas Galiotis, and Bish Arjyal

THREE-DIMENSIONAL DESIGN ANALYSIS FOR HYSTERETIC BEHAVIOR OF TINI-SMA FIBER EMBEDDED SMART COMPOSITES
M. Kawai

SMART NDT USING ELECTRICAL RESISTANCE METHOD FOR DELAMINATION MONITORING IN CFRP
Kaori YUSE and Claude BATHIAS

STRAIN CAPABILITY OF OPTICAL FIBRE BRAGG GRATING SENSING IN COMPOSITE SMART STRUCTURES
C Y Wei, S W James, C C Ye, N D Dykes R P Tatam, and P E Irving

LAMB WAVES GENERATION USING A TRANSDUCER EMBEDDED IN A COMPOSITE PLATE
Emmanuel Moulin, Jamal Assaad, Christophe Delebarre and Daniel Osmont

LIFE ENHANCEMENT AND REPAIR OF STRUCTURES USING SHAPE MEMORY ALLOY COMPOSITE PATCHES
Kelly A. Tsoi, Xiaoming Wang, Yiu-Wing Mai, and Stephen C. Galea

RESONANCE CONTROL OF GENERALLY SUPPORTED SMART BEAM-PLATES USING FOURIER SERIES METHOD
Chien-Chang Lin, and Huang-Nan Huang

VIBRATION CHARACTERISTICS OF CFRP LAMINATES WITH EMBEDDED SHAPE MEMORY ALLOY FIBERS
Masaki Sato, Hideki Sekine, and Yuichi Hayakawa

EFFECT OF EMBEDDED OPTICAL FIBERS ON THE STRUCTURAL INTEGRITY OF COMPOSITES
Arne Skontorp

SMART COMPOSITES WITH INTEGRATED TINY PIEZOELECTRIC FIBERS
Dieter Sporn, Winfried Watzka, Andreas Sch÷necker and Kord Pannkoke

SMA COMPOSITES FOR AERO-STRUCTURE REPAIRS
Xiaoming Wang, Kelly Tsoi, Lin Ye, Yiu-Wing Mai, Stephen C. Galea and L. R. Francis Rose

EFFECT OF MATRIX AND REINFORCEMENT MORPHOLOGY ON MECHANICAL PROPERTIES OF AL/TINI SHAPE MEMORY COMPOSITE
Changhun Han, Ildong Choi, Kyungmox Cho and Ikmin Park

INTERFACIAL STRENGTH OF OPTICAL FIBRES
Klas Levin

ON MINIMISING THE OBTRUSIVITY OF AN OPTICAL FIBRE SENSOR WITH RESPECT TO MATRIX CRACKING
E.N. Barton, S.L. Ogin, A.M.Thorne and G.T. Reed

A FLAT SHELL COMPOSITE ELEMENT INCLUDING PIEZOELECTRIC ACTUATORS
JosÚ Ant˘nio Hernandes and Rafael Takeda Melim

DESIGN OF SMART COMPOSITE LAMINATES AND THIN-WALLED BEAMS
C. Kaiser, H. Baier

THE MODEL OF MODULUS DEGRADATION NEAR EDGES ZONES FOR COMPOSITE MATERIALS
S.A. Lurie, A.R.Vvedensky, S.Yousefi

COMPOSITE STRUCTURES WITH BUILT-IN DIAGNOSTICS
Fu-Kuo Chang

OPTIMAL PIEZO-PATCH DESIGN OF COMPOSITE BEAMS UNDER UNCERTAIN LOADS FOR MINMAX DEFLECTION
Ibrahim S. Sadek John C. Bruch Jr., James M. Sloss and Sarp Adali

DYNAMICAL MODELLING OF THE CHAIN STRUCTURE FORMATION IN ELECTRORHEOLOGICAL FLUIDS
BIAO WANG, YULAN LIU and ZHONGMIN XIAO

USE OF SENSORS AND SIMULATIONS TO MOVE TOWARDS AUTOMATION OF THE RESIN TRANSFER MOLDING PROCESS
Suresh G. Advani, E. Murat Sozer, Simon Bickerton, Hubert C. Stadtfeld, and Karl V. Steiner

THE FULL CONTROLLED DEFORMATIONS OF ACTIVE COMPOSITE PLATES AND SHELLS WITH SHAPE MEMORY ALLOYS
Lurie S.A., Kroplin B., Dinkler D.

SMART SENSORS FOR RESIN FLOW AND COMPOSITE CURE MONITORING
Rodriguez-Lence F., Munoz-Esquer P., Menendez J.M, Pardo de Vera C., Diaz S.,Guemes, J.A.

COPPER ELECTROLESS DEPOSITION ON NITI SHAPE MEMORY ALLOY : AN XPS STUDY OF SN-PD-CU GROWTH
J.F. Silvain, S. Trombert, J. Chazelas, M. Lahaye, Olivier Fouassier

FATIGUE LIFE BEHAVIOUR OF SNPBAG/NITI COMPOSITE
S. Trombert, J. Chazelas, M. Lahaye, Olivier Fouassier, J.F. Silvain

DETECTION OF TRANSVERSE CRACKS IN COMPOSITE LAMINATES BY EMBEDDED PLASTIC OPTICAL FIBERS
Nobuo Takeda, Tatsuro Kosaka and Takayuki Ichiyama

STUDY OF VIBRATION MODAL ESTIMATION FOR COMPOSITE BEAM WITH PZT THIN FILM SENSOR SYSTEM
Nobuo Oshima, Takehito Fukuda and Shinya Motogi

FUZZY CONTROL OF VIBRATION OF A SMART CFRP LAMINATED BEAM
Takeshi Takawa, Takehito Fukuda, Koichiro Nakashima

DESIGN AND COMPUTER MODELLING OF SMART COMPOSITE MATERIALS OF THE TYPE LAMINATED METAL-CERAMIC COMPOSITES WITH NEURAL NETWORK ADAPTIVE CONTROL OF ELASTIC WAVES TRANSFORMATIONS
V. D. Koshur

ADVANCED COMPOSITES FOR SMART STRUCTURES
Georges Akhras


[ HOME ]  [ BACK ]